Daimyo-Phaeron Lenoch Posted August 2, 2020 Share Posted August 2, 2020 (edited) Today in the hobby I returned. From a short break. Almost 2 years Say, I remember you, though I can’t exactly remember from where. Welcome back, brother deathspectersgt7! Edited August 2, 2020 by Daimyo-Phaeron Lenoch Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5576740 Share on other sites More sharing options...
KBA Posted August 3, 2020 Share Posted August 3, 2020 Today in the hobby I did my first conversions in a couple years on some extra Indomitus marines: Chaplain: Judicar: Tichinde, Magos Takatus, cretacianborn and 4 others 7 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5576807 Share on other sites More sharing options...
MrSpoon Posted August 3, 2020 Share Posted August 3, 2020 TITH I got the first set of bases for my outriders ready to prime: I'm assuming that is DAS clay with a GSW roller? May I ask how you got the edge so smooth? Mine always come out a bit more "rustic" even using the GSW cookie cutter thing. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5576899 Share on other sites More sharing options...
Torbenos Posted August 3, 2020 Share Posted August 3, 2020 Put together my first space wizard. Doghouse, Tichinde, Viridia and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5577424 Share on other sites More sharing options...
BitsHammer Posted August 6, 2020 Share Posted August 6, 2020 YITH I did some work on trying to dial in a nice "drowned corpse" skin tone for Nurgle: And I gave up on the idea of painting Iyanden. I've noticed I tend to stall out when painting projects are based on existing factions, so I went a different direction: Though that's going to get a repaint as I want to go more subdued with the red and add some more depth to the pink and purple by using darker base tones. Otherwise I'm not too unhappy with that rough color test. Magos Takatus, Viridia, Focslain and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5579215 Share on other sites More sharing options...
painting.for.my.sanity Posted August 7, 2020 Share Posted August 7, 2020 YITH I made lots of progress on my Indomitus Chaplain. Hopefully I'll get him finished today (sooo much black to highlight), then I can do the basing for him and my Judiciar, and then maybe pretty photos of the pair of them tomorrow. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5579722 Share on other sites More sharing options...
WrathOfTheLion Posted August 7, 2020 Share Posted August 7, 2020 YITH I finished a 5 man tactical support squad for my 1st Legion. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5579737 Share on other sites More sharing options...
BitsHammer Posted August 7, 2020 Share Posted August 7, 2020 First five hours of work on my GUO: Doghouse 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5579976 Share on other sites More sharing options...
thewarriorhunter Posted August 7, 2020 Share Posted August 7, 2020 TITH I got the first set of bases for my outriders ready to prime: I'm assuming that is DAS clay with a GSW roller? May I ask how you got the edge so smooth? Mine always come out a bit more "rustic" even using the GSW cookie cutter thing. It's actually Sculpy brand clay, cured by baking in the oven. I roll out the clay and use a GSW roller. I then have 'templates' (pieces of paper that are cut to size) and use my hobby knife to cut out the general shape. Into the oven for an hour and after they've cooled I glue them to the bases. After the glue is cured I use a razor blade and run it around the base to trim off the overhand, then a quick sanding and you have what you see there. TITH I finished the bases for my Aggressors Doghouse, Viridia and BitsHammer 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5580080 Share on other sites More sharing options...
SvenIronhand Posted August 8, 2020 Share Posted August 8, 2020 Assembled and wolfed up some Assault Intercessors, painted a Wolf Lord. I got rid of the white pooling marks, this is just the most recent picture. Doghouse, mactire, NiceGuyAdi and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5580235 Share on other sites More sharing options...
BitsHammer Posted August 8, 2020 Share Posted August 8, 2020 Surprised you did't give him a wolf shield resting atop a dead Rubic to make up the height difference.... Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5580236 Share on other sites More sharing options...
Sky Potato Posted August 8, 2020 Share Posted August 8, 2020 (edited) TITH I finished my Death Guard from Conquest magazine Edit - I say finished. The sponson weapons for the Plague Burst Crawler are going to get magnetised. They’re painted, but they’re in the magnetising pile with the Repulsors. Edited August 8, 2020 by Sky Potato Doghouse, mactire, brother_b and 5 others 8 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5580325 Share on other sites More sharing options...
Doghouse Posted August 8, 2020 Share Posted August 8, 2020 TITH I got new toys in the post. Thanks to Hachette restocking some items briefly and some detective work on my part to find a few sprues I got two new on the sprue Repulsors for about £55 for both and two Easy to Build Redemptors for £32 for both of them. brother_b, painting.for.my.sanity and Dwango 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5580423 Share on other sites More sharing options...
Sky Potato Posted August 9, 2020 Share Posted August 9, 2020 TITH I have started blocking in the armour panels on a Castellan Knight and 2 Armigers from the Apocalypse box from last summer. They were assembled at the end of last year and the eco-skeletons painted at the start of lockdown. Also TITH I have discovered why people hate painting yellow. Doghouse 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581005 Share on other sites More sharing options...
BitsHammer Posted August 9, 2020 Share Posted August 9, 2020 TITH I have started blocking in the armour panels on a Castellan Knight and 2 Armigers from the Apocalypse box from last summer. They were assembled at the end of last year and the eco-skeletons painted at the start of lockdown. Also TITH I have discovered why people hate painting yellow. If it helps, yellow goes over Wraithbone or Grey Seer like a dream. It also goes over Corax White but that spray can be harser to work with. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581028 Share on other sites More sharing options...
Doghouse Posted August 9, 2020 Share Posted August 9, 2020 TITH I started mkaing my Repulsors and nearly ended up throwing them up against the wall the were so frustrating. Luckily I found a guy called Painting Marine on Youtube who came up with a way to make it so you don't get gaps in the front plates. I love GW models but hate making Astartes tanks, the same flaws that the Land Raider suffered from have been inherited by it's younger brother. A lot of the kit goes nicely together and is well thought out but those gaps!!! /rant :D It's not a bad kit but Painting Marine's solution helps tons, so hat off to you sir. Now for the Grav plates... Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581031 Share on other sites More sharing options...
The Yncarne Posted August 9, 2020 Share Posted August 9, 2020 YITH I: played with my 'Sons for the first time in about 18 months played against primaris marines (white scars) for the first time played my first game of 9th edition Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581036 Share on other sites More sharing options...
Sky Potato Posted August 9, 2020 Share Posted August 9, 2020 TITH I have started blocking in the armour panels on a Castellan Knight and 2 Armigers from the Apocalypse box from last summer. They were assembled at the end of last year and the eco-skeletons painted at the start of lockdown. Also TITH I have discovered why people hate painting yellow. If it helps, yellow goes over Wraithbone or Grey Seer like a dream. It also goes over Corax White but that spray can be harser to work with. It doesn’t help that much - I primed everything in Leadbelcher! Thanks for the heads up though. It’s looking good so far. Just many MANY coats. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581037 Share on other sites More sharing options...
BitsHammer Posted August 9, 2020 Share Posted August 9, 2020 TITH I have started blocking in the armour panels on a Castellan Knight and 2 Armigers from the Apocalypse box from last summer. They were assembled at the end of last year and the eco-skeletons painted at the start of lockdown. Also TITH I have discovered why people hate painting yellow. If it helps, yellow goes over Wraithbone or Grey Seer like a dream. It also goes over Corax White but that spray can be harser to work with. It doesn’t help that much - I primed everything in Leadbelcher! Thanks for the heads up though. It’s looking good so far. Just many MANY coats. I recommend doing the armour panels separately from the skeleton in the future. Makes it easier to do the panels that way. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581048 Share on other sites More sharing options...
Sky Potato Posted August 9, 2020 Share Posted August 9, 2020 Oh, I am, all the armour is separate. I’m following Duncan’s guide on Warhammer TV, I sprayed the panels separately with Leadbelcher, as Duncan does the trim of the armour first before blocking in the actual armour panel. So I’ve sprayed Leadbelcher, layered Ironbreaker, shaded Nuln Oil and drybrushed Necron compound before even starting on the yellow. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581051 Share on other sites More sharing options...
WrathOfTheLion Posted August 9, 2020 Share Posted August 9, 2020 Going to an intermediate color first, especially beige, can work better for going up to yellow or orange. Beige pigment has stronger coverage and can make the thinner yellow/orange pigment pop more. Vince Venturella had a video on orange which shows some of its properties, which should be similar to yellow I think. Doghouse 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581058 Share on other sites More sharing options...
Viridia Posted August 9, 2020 Share Posted August 9, 2020 TITHI started selling off anything still in a box in my collection. I've decided to cut down to Inquisimunda/Blanchitsu projects and Adeptus Titanicus now. Also started undercoating my Reaver before I buy the magnets for it. Doghouse 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581133 Share on other sites More sharing options...
WrathOfTheLion Posted August 9, 2020 Share Posted August 9, 2020 YITH, I finished 5 Word Bearers tactical marines for my WB legion. TITH, I'm working on some Word Bearers 40k Chaos Terminators that I have airbrushed the base coat on. Doghouse 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581158 Share on other sites More sharing options...
Torbenos Posted August 9, 2020 Share Posted August 9, 2020 (edited) Been starting to test paint my rubrics, hoping to collect a space wizard force but I am struggling so far. I've the notion to make black and silver in main colour scheme, silver trim and black plates but so far it's coming out as -very- flat. Dry-brushing some off blacks over the black has helped some but I'm not happy. I am starting to consider changing the trim to a more classic gold, or even just the main colour to blue since that's confirmed to work well. Edited August 9, 2020 by Torbenos Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581343 Share on other sites More sharing options...
BitsHammer Posted August 10, 2020 Share Posted August 10, 2020 More work on ol' Bogfeltch (I swear he'll be done this week, Nurglings and all so I can move onto his smaller kin): Doghouse 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/384/#findComment-5581402 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now