Jump to content

Recommended Posts

I'm torn, because I think the small one on the inside makes it looks more assymetrical and I love assymetry in models. That being said, I do think the small one on the outside makes it have more character - and a menacing character at that.

 

Small answer to forte - try mixing a little milliput with grey or green stuff: it takes away the 'rubbery' feel of GS and adds rigidity of the cured product (ie make it hard as stone :wink:)

  On 10/9/2014 at 2:22 PM, KrautScientist said:

Yes, the small one should go on the outside. The other eye will remain like that, though, right? I like the asymmetry about it!

 

Amazing job, mate, as usual! :)

thanks kraut, and on a side note looking forward to seeing the other oblit ;)

 

  On 10/9/2014 at 2:27 PM, forte said:

Don't like your stuff! No chance of that. Your scheme is consistently of a high standard. Your osl glows. And your conversions and scratch builds have me throwing my phone across the room.

It's all down to me now working and spending time in the Chaos forum (where time flows strangely).

Talking of Chaos...Call of Chaos starts on the 15th. Not that I'm hinting or anything :rolleyes:

thanks forte, there been times when you where the onlyone that wrote any comments in my thread :)

and ofc i will awser the call of chaos

 

  On 10/9/2014 at 4:06 PM, ElDuderino said:

Man your stuff is impressive as hell.

Another vote for small on the outside, works better with the curve of the eye socket

thanks eldude, its from the warp afterall ;)

 

zv

  On 10/10/2014 at 4:10 AM, gaurdian31 said:

I also vote small on the outside and that head is looking great.

thanks the headis not all done yet but close

 

  On 10/10/2014 at 5:18 AM, Tanith Ghost said:

Well I'm going to be the oddball and say it looks better on the inside. Think it fits the socket of the eye better. Just the minority opinion :P

was expecting people to vote close to 50/50 on the eyes

thanks for your inout tanith

 

  On 10/10/2014 at 3:10 PM, Augustus b'Raass said:

I'm torn, because I think the small one on the inside makes it looks more assymetrical and I love assymetry in models. That being said, I do think the small one on the outside makes it have more character - and a menacing character at that.

 

Small answer to forte - try mixing a little milliput with grey or green stuff: it takes away the 'rubbery' feel of GS and adds rigidity of the cured product (ie make it hard as stone ;))

thanks augustus, and all of you, ill go with the most wotes on the eyes.

 

was gonna take some pics and post but got sidetracked and ended up watching dracula, and didnt have time when i got home.

 

should have some great stuff to show tomorrow though

  On 10/10/2014 at 8:25 PM, thamier said:

 

  On 10/9/2014 at 2:22 PM, KrautScientist said:

Yes, the small one should go on the outside. The other eye will remain like that, though, right? I like the asymmetry about it!

 

Amazing job, mate, as usual! :smile.:

thanks kraut, and on a side note looking forward to seeing the other oblit :wink:

 

 

Oh, don't worry: There will be a second Obliterator, eventually and it will be GLORIOUS! (mostly due to your excellent custom parts, of course) ;)

Those were early days. Always happens with new threads. Slow start then as soon as others see how good thing look...

 

I bet if you started a new thread people would look straight away due to the name now ;)

  On 10/10/2014 at 8:34 PM, KrautScientist said:

 

  On 10/10/2014 at 8:25 PM, thamier said:

 

  On 10/9/2014 at 2:22 PM, KrautScientist said:

Yes, the small one should go on the outside. The other eye will remain like that, though, right? I like the asymmetry about it!

 

Amazing job, mate, as usual! :)

 

thanks kraut, and on a side note looking forward to seeing the other oblit ;)

 

Oh, don't worry: There will be a second Obliterator, eventually and it will be GLORIOUS! (mostly due to your excellent custom parts, of course) ;)

 

looking forward to it mate

 

  On 10/11/2014 at 6:20 AM, forte said:

Those were early days. Always happens with new threads. Slow start then as soon as others see how good thing look...

I bet if you started a new thread people would look straight away due to the name now ;)

not too sure of that forte, and i dont plan on starting any new threads :)

 

  On 10/11/2014 at 6:56 AM, Dorns_fist said:

Wow that plastic card building is awesome

thanks mate

 

and now for those pictures i didnt post last night, its getting there. will add chaos decor on the blast "shield" ofc

 

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/6D6D97A1-F9B6-4F8D-9CD7-F30CAE940DF5.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/CBDD2677-4DCB-4A99-A8FD-4B4D0EFF701F.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/B705ED1D-C2FC-46F0-8DBF-0A22AF26F0BC.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/4B14C9B2-3C0C-4A94-8E4C-2FB1326FC67A.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/70C0BAB6-15EC-46B4-8F4E-236FB21A475E.jpg

 

im really happy with how the front of t cannon mounting turned out, even proud, the knoght cannon bit snaps right on and sits snugly so its fully interchangable.

tomorrow!

 

 

hmm not saying anything more will be too cryptic, so to elaborate, the defiler will be done tomorrow!

BUT not the knight part yet, working on the last bits on the head tomorrow and started on the knight melta weapon.

sonwhen the melta option is done and the destroyer melee weapon is dome it can be used as chaos knight with all options or a two legged defiler with all options battlecanons melta reapers lascannons flamers and powerlegs(or fists depending on how you look at it)

might even be able tomrun ot as a knight lancer.

 

 

so tomorrow the base is done, the last two weapon options will take a few days more.

 

now if only subtle discord would lend me his workshop with all its wonderful mould making and casting tools ;)

update time, thought i better share todays work, the defiler walks! just need to make the last two weapons for the knight upgrade.

 

took some fast pics and again with knight for size comparrison a plaguemarine even snuck in.

 

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/826CED63-9DB4-4B1C-9B71-2F06E7146330.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/A0137CBD-E11A-4277-A49C-4D265D00CB09.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/D6AE71B8-5241-4801-ACD2-A48F00888311.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/5067FE8F-7195-45B8-8B98-113E0D478148.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/BB697048-2494-4C98-8345-07F94811E57E.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/5DAA0E64-3EC4-49B5-AD8A-CD1D3407A121.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/F7A933BC-8C4F-4B61-9CAA-3E4B82928B45.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/65CCA3CC-8231-41D1-BBB8-13CCEEF94EAD.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/B27A12EE-4D2C-4C75-9289-DE1CDDDBB874.jpg

 

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/139D026A-18ED-4A8B-82AA-3FFD001D3104.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/727C38BB-C08C-4A54-930C-EE97314EC25C.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/04660747-B783-4B80-B21B-3C6EDB0A974D.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/3EE83CF9-B737-4570-89A2-593D35D4EE74.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/9E7B318D-F79A-44BB-91CE-818373760A1A.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/A667FE0F-E63E-4C54-B4A2-11F6D9367AC4.jpg

 

but after i make the last weapons it be put on hold until i can get it cast in ressin

  On 10/13/2014 at 8:46 PM, Noctem Cultor said:

Great work, I love the extra detailing trim.

The glow has inspired me to make a point of having glowing red eyes on my Night Lords.

thanks, and glow is nice, would love too see what you made, everyone loves nightlords

First I read this:

  On 10/13/2014 at 8:17 PM, thamier said:

update time, thought i better share todays work, the defiler walks! just need to make the last two weapons for the knight upgrade.

took some fast pics and again with knight for size comparrison a plaguemarine even snuck in.

  Reveal hidden contents

...and I was like:

IMPRESSIVE

Then I read this:

  On 10/13/2014 at 8:17 PM, thamier said:

but after i make the last weapons it be put on hold until i can get it cast in ressin

...and I was like: 

TEARS OF JOY

So much awesome. Love how much bulkier and lumbering he seems compared to the knight. Question though, is that how you're going to keep the autocannon? Wondering if you were going to make a shield or armored covering around the top to bulk it up a bit? Seems kinda small is all compared to his massive battlecannon in the other arm. :wacko.:

  On 10/13/2014 at 9:39 PM, disease said:

take my money.

 

all of it

 

right now

:) so that means you like it?

 

  On 10/14/2014 at 5:41 AM, forte said:

 

  On 10/13/2014 at 9:39 PM, disease said:

take my money.

all of it

right now

Dito

so that means you like it aswell? :)

 

  On 10/14/2014 at 6:33 AM, Augustus b'Raass said:

First I read this:

 

  On 10/13/2014 at 8:17 PM, thamier said:

update time, thought i better share todays work, the defiler walks! just need to make the last two weapons for the knight upgrade.

took some fast pics and again with knight for size comparrison a plaguemarine even snuck in.

  Reveal hidden contents

 

...and I was like:

IMPRESSIVE

Then I read this:
  On 10/13/2014 at 8:17 PM, thamier said:

but after i make the last weapons it be put on hold until i can get it cast in ressin

 

...and I was like: 

TEARS OF JOY

that made me smile, i want a whole gang of these, before i start building my chaos titan legion

 

 

  On 10/14/2014 at 9:44 AM, KrautScientist said:

Absolutely, utterly, inscrutably awesome! I'll take three :)

maybe you can get one in a bits trade, if i can find someone to help me cast more.

  On 10/14/2014 at 10:05 AM, Tanith Ghost said:

So much awesome. Love how much bulkier and lumbering he seems compared to the knight. Question though, is that how you're going to keep the autocannon? Wondering if you were going to make a shield or armored covering around the top to bulk it up a bit? Seems kinda small is all compared to his massive battlecannon in the other arm. :wacko:

im going to keep it like that, no blast sheild for that arm, when placed next to eachother they are very close in size, just not in length, also a sheild will make it hard to change out the reapers for lascannon

 

here they are next to eachother

 

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/DB4AF944-7067-4F56-9712-7D938B438741.jpg

 

i dont know, dose it need bulking up?

and here is my wip on the melta knight option, anyone know its statline?

 

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/528A7CBD-4D11-44DD-BD45-10F787B8B848.jpg

http://i942.photobucket.com/albums/ad269/thamier/work%20in%20progress/871F0C73-9B0D-45D4-A73C-94BCF879A7A9.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.