Khorne's Eternal Hunt - KrautScientist's chaotic WIP thread: Fine-tuning Eightbound...

[KrautScientist]

@ daemonclaw: Cheers, mate! :)

 

@ thamier: Whoa, not so fast: I am still working on that Obliterator, you know ;) Right now, I have worked a bit on the right ankle in order to get rid of the gap forte mentioned. I have also added some final bitz to the arms (mainly trophies) and filled up a few smaller holes and crevices in the legs and torso -- the GS is curing as I am typing this. New pictures tomorrow, I guess. And if all goes well, I might actually get to start with the paintjob this weekend.

 

Beyond that, there will be more projects in due time ;) Oh, and I am also kitbashing quite a few models for INQ28 at the moment, which can be found on my blog ;)

[oldschoolsavant]

Guess I'm the silent minority that absolutely adores that first Oblit, there's just the glimpse of a pure concept seeping through. The following two don't quite gel, but I think that's due to the positioning.

 

Suppose you're sticking with the new direction though, so good luck.

[KrautScientist]

@ OSS: Oh, don't get me wrong: Those older, Centurion-based Oblitz will be finished at some point. It's just that I'm having more fun with thamier's parts right now

 

Speaking of which, another update regarding my Thamier pattern Obliterator: Added another round of spiky bitz yesterday, worked a bit on the right foot in order to make it look more natural and plugged all remaining holes and crevices with GS. Here's the model, pretty much ready for a last bubble bath and then some paint

http://images.dakkadakka.com/gallery/2014/6/14/621585-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

http://images.dakkadakka.com/gallery/2014/6/14/621586-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

http://images.dakkadakka.com/gallery/2014/6/14/621587-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

http://images.dakkadakka.com/gallery/2014/6/14/621588-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

http://images.dakkadakka.com/gallery/2014/6/14/621589-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

http://images.dakkadakka.com/gallery/2014/6/14/621590-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

I also realised that the model needed something to clearly show its allegiance to Khorne, but regular bunny ears were right out due to a lack of space around the collar. So I improvised, using an icon of Khorne instead. I also tried yet another head, although I might actually like this one the best so far: It just has a subtly feral quality that I think really fits the bill.

Anyway, let me know what you think!

Edited June 14, 2014 by KrautScientist

[Augustus b'Raass]

I love it! And I think the icon is even better than possible bunny ears. 

[KrautScientist]

Cheers, mate! I have to thank the one and only Wade Pryce's World Eaters army for the idea -- he used it on one of his chaos lords way back when. Anyway, I am pretty pleased with the outcome :)

[Dragonlover]

Was Wade Pryce the guy who had a unit of Terminators that were all converted from Abaddon?

 

Dragonlover

[KrautScientist]

Hmm, I don't know. None of Wayde's Terminators I know have been converted from Abaddon. He was (is?) a GW employee whose World Eaters army has heavily inspired just about every WE player I know. I'd just link to his site, but unfortunately it seems to have gone down a short while ago -- and the feature on the GW homepage is also gone as of the re-design.

 

His army features rather heavily in the big 6th edition rulebook (it's used in a studio campaign alongside a host of Word Bearers), plus the Google image search will still give you a look at some of his models.

[Skrundle87]

Great work man, I really like both lots of oblits

[KrautScientist]

Thanks, Skrundle! :)

[deathspectersgt7]

Great work man, I really like both lots of oblits

Ditto!!!!

[KrautScientist]

Cheers, deathspectersgt7! :)

 

Now while the big guy is taking a small break on my painting table (I have actually begun painting a model! Go me! ;) ), I have something new to show you: Working on that Helbrute rocket launcher also gave me the motivation to try something I had been thinking about for quite a while: Building an Ursus Claw for my Chaos Helbrute(s).

For those not in the know, an Ursus Claw is a weapons system typical of the World Eaters Legion: It is effectively a harpoon that can be fired at an opponent (preferredly a retreating one), in order to impale him, possibly already creating critical damage, and then reel him back in for the finale. The World Eaters used this weapon system both on their flagship, the Conqueror and on the allied Titans of the Legio Audax, so I thought arming a World Eaters Dreadnought with one of those systems probably wasn’t all that unrealistic. More on the Ursus Claw here, in case you are interested.

Now when I started planning this conversion, I looked around for inspiration and found an image from a conversion by fellow hobbyist sheep, nestled away deep within my inspiration folder (check out his amazing Khornate models on his blog.:



The picture actually provided a perfect starting point for my conversion: The psy-weapon CC arm from the Furioso Dreadnought kit. And since Marax the Fallen had been converted from that very kit, I still happened to have the arm in my bitzbox.

The second piece of inspiration came from Forgeworld’s Blood Slaughterer Impaler, because that model is, for all intents and purposes, armed with an Ursus Claw as well. The weapon gave me a pretty good idea for building the chain winch that makes for the truly nasty part of the weapon, allowing the harpoon to be reeled back in.

So with those two ideas in my head and a couple of bitz on my table, I got to work.

And here’s my own WIP Ursus Claw, already provisionally mounted on my model for Marax the Fallen:

http://images.dakkadakka.com/gallery/2014/6/18/622805-Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Dreadnought%2C%20Helbrute%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

http://images.dakkadakka.com/gallery/2014/6/18/622802-Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Dreadnought%2C%20Helbrute%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

http://images.dakkadakka.com/gallery/2014/6/18/622803-Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Dreadnought%2C%20Helbrute%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

As you can see, the arm is pretty much the stock bit, whereas the harpoon mechanism is a combination of the two sources cited above. I fortunately had a perfect chain winch bit from some Ogre Kingdoms kit in my bitzbox, and it was ideal for this conversion. The chain came from another Ogre kit. The housing for the winch is a shaved down part of a Predator Lascannon turret weapon. And, to make things suitably chaotic and to tie in the weapon with the look and feel of my army, the housing was decorated using two Chaos Marauder shields.

Here’s the weapon arm on its own:

http://images.dakkadakka.com/gallery/2014/6/18/622806-Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Dreadnought%2C%20Helbrute%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

One thing I kept going back and forth on is the actual harpoon, because I wasn’t sure whether it needed to be more ostentatious and/or claw like, like the one on the Blood Slaughterer. In the end, though, I decided that a more clawlike appearance would mean that it would be harder to actually recognise the weapon as a harpoon constructed to be launched at the enemy, so I stuck with the simpler design — what do you think?

http://images.dakkadakka.com/gallery/2014/6/18/622804-Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Dreadnought%2C%20Helbrute%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

Anyway, once this Ursus Claw and the kitbashed rocket launcher arm are painted, I will have a pretty exhaustive collection of Dreadnought/Helbrute weapons — as a matter of fact, I built this last arm mostly for fun anyway, rather than for added tactical flexibility. Still, I think it’ a fairly cool option for featuring an element from the World Eaters’ recent fluff in my army!

As always, let me know what you think! :)

[Teetengee]

I just made it through this thread and wow, I love this stuff.

[Daemon2027]

Amazing thread. There are some fantastic conversions here.

[thamier]

looking good kraut, now i wish i had thought of that :)

 

and looking forward to seeing the painted model your working on

[Montuhotep]

Looking very nice - my only concern is that there are no barbs on it, making it easy to slip loose before the chain dragged the target in.

[Augustus b'Raass]

Kraut, I love it! Perfect conversion - really awesome. Suitably brutal for a Khornate army like yours.

 

One observation, purely as food for thought: the way you built it, the chain has to move through the arm, creating incredible torc and friction, which would slow down the harpoon's momentum the moment it leaves the 'barrel', and thus make it only effective in extreme close quarters. This is why whaler harpoons have the cable attached behind the tip. However, your take on the weapon does make it more 're-usable', as the harpoon can be retracted in place after use... 

[Teetengee]

Without support crew, I would think that Kraut's method is the only viable one, I don't think any men are going to help poor old [insert dreadnought name here] reload his arm when the nails be hummin'.

[Augustus b'Raass]

Without support crew, I would think that Kraut's method is the only viable one, I don't think any men are going to help poor old [insert dreadnought name here] reload his arm when the nails be hummin'.

Totally true!

[daemonclaw]

nice work kraut

http://i2.photobucket.com/albums/y30/daemonclaw/eagle_zps44984a38.gif

 

,man i would not want to be anywhere near when that harpoon went off

[ElDuderino]

Kraut, I love it! Perfect conversion - really awesome. Suitably brutal for a Khornate army like yours.

 

One observation, purely as food for thought: the way you built it, the chain has to move through the arm, creating incredible torc and friction, which would slow down the harpoon's momentum the moment it leaves the 'barrel', and thus make it only effective in extreme close quarters. This is why whaler harpoons have the cable attached behind the tip. However, your take on the weapon does make it more 're-usable', as the harpoon can be retracted in place after use...

 

Just say that the chain is made of lubricantium or something like that:)

 

Great work as usual KS, always looking forwards to updates from you

[Augustus b'Raass]

HAHAHA Lubricantium! No-one can say Chaos players lack imagination. 

[Forté]

HAHAHA Lubricantium! No-one can say Chaos players lack imagination.

Well hello. Think I can find a few uses for Lubricantium.

[Skrundle87]

Very good work once again kraut looks awesome, can't wait to see it painted on there

[KrautScientist]

Thanks a lot for the positive feedback, guys! :)

 

Kraut, I love it! Perfect conversion - really awesome. Suitably brutal for a Khornate army like yours.

 

One observation, purely as food for thought: the way you built it, the chain has to move through the arm, creating incredible torc and friction, which would slow down the harpoon's momentum the moment it leaves the 'barrel', and thus make it only effective in extreme close quarters. This is why whaler harpoons have the cable attached behind the tip. However, your take on the weapon does make it more 're-usable', as the harpoon can be retracted in place after use... 

 

Haha, true story: I agonised over how best to build the harpoon mechanism for ages, and it would almost have prevented me from building the weapon in the first place. The fact that I have very little knowlege of basic mechanics didn't exactly help, of course ;) In that way, finding the Blood Slaughterer Impaler was kind of liberating, because it gave me the idea where to place the chain winch. But then, the connection between the chain and harpoon is hidden within the weapon's housing on the Impaler, and I knew I definitely wanted to include a visible chain, so I had to come up with something slightly different...

 

Anyway, what I am trying to say here is that in the end I just said "Screw it!" and started converting. The result may not hold up when seen from a mechanical standpoint, but I think it's just believable enough with a bit of goodwill ;) That said, it was still a bit of work, making sure the lenght of chain fit together with the chain winch and harpoon ...not something I really want to repeat, to be honest ;)

 

 

HAHAHA Lubricantium! No-one can say Chaos players lack imagination.

Well hello. Think I can find a few uses for Lubricantium.

 

 

Whoa, whoa, you keep your Slaaneshi ideas to yourself, buddy! This is a decent, god-fearing Khorne thread over here, thank you very much ;)

 

 

Oh, and just so you believe me when I say I am actually painting the Obliterator right now:

 

http://images.dakkadakka.com/gallery/2014/6/19/623136-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

 

http://images.dakkadakka.com/gallery/2014/6/19/623135-Behemoth%2C%20Chaos%2C%20Chaos%20Space%20Marines%2C%20Conversion%2C%20Khorne%2C%20Khorne%27s%20Eternal%20Hunt.JPG

 

The arms are still missing, and there's quite a bit of cleanup work left to do, but you get the idea ;)

[Augustus b'Raass]

Cheers buddy! Well, you don't have to do this again because this looks totally awesome. And who cares that the harpoon is only usable at short range anyway? A Khornate follower needs to stick in!