Mitsman Posted January 25, 2019 Author Share Posted January 25, 2019 +++ Progress Report Delta +++ Last couple of days I am too tired to touch a brush. So much work at the office... I did not want to leave it like this, now that I am back and painting, so here is a small update on the termie squad. @Bjorn Firewalker: Thanks for the kind comments Mitsman Bjorn Firewalker, robofish7591, Focslain and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5241730 Share on other sites More sharing options...
Jukkiz Posted January 25, 2019 Share Posted January 25, 2019 Looking great, also love those forgeworld crux terminatus pads~~Adding more highlights to blue later? Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5241760 Share on other sites More sharing options...
Mitsman Posted January 25, 2019 Author Share Posted January 25, 2019 Hey Jukkiz, Yeah I forgot to mention that the blue is basic only. There is at least another 4 layers to come. What I would call ready -ish are the guns, the chest eagles, the helmets and head and maybe half of the metals in general. There are some details to mesh everything together and some final highlights to be done plus text to every single purity seal. Only after every other detail is finished do I visit the blue of the armour, basically the very last step before I touch the bases. Mitsman Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5241778 Share on other sites More sharing options...
Bjorn Firewalker Posted January 26, 2019 Share Posted January 26, 2019 Good job on the Terminators. Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5241941 Share on other sites More sharing options...
Mitsman Posted January 26, 2019 Author Share Posted January 26, 2019 Ok opinion time. Would you people prefer to see the "MUNDI D" as in "500 worlds" on his shoulder shield or a transfer? Do you like how it shows? Bad choice of colours? Stop freehanding Mitsman you are a disgrace? Anyone? Mitsman Deadass and Bjorn Firewalker 2 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5242197 Share on other sites More sharing options...
Deadass Posted January 26, 2019 Share Posted January 26, 2019 Don't worry, your freehanding is ace. This whole thread is admirable! I'd stick with the iconography as you've painted it right now, I like that it's different from all the ultima symbols, skulls and whatnot that is usually found on those shields. Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5242209 Share on other sites More sharing options...
Bjorn Firewalker Posted January 26, 2019 Share Posted January 26, 2019 Good job on the Terminator CAPT. Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5242308 Share on other sites More sharing options...
Mitsman Posted January 27, 2019 Author Share Posted January 27, 2019 Thanks guys. @Bjorn : Actually he is a lowly sergeant. He was free with a White Dwarf at some point, if I remember correctly. Mitsman Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5242617 Share on other sites More sharing options...
Mitsman Posted February 2, 2019 Author Share Posted February 2, 2019 +++ Progress Report Epsilon +++ +++ Final Report +++ At last today I finished the terminator squad. All six guys painted based and pictured in about a month's time... Not the fastest on the Imperium :( Today in particular I was feeling and adventures and I wanted to gamble. So I decided to spray the squad with Citadel Purity Seal before completing the grass. You see the layers were done quite thin and I was very worried that even from the first game, the black undercoat would show immediately. And thus I gambled!!! But the Emperor protects, he will not let his sons be bubbly and smoky in vain so, after testing on a piece of sprue, I did it! You be the judge. Hope you like them. And just in time for the new bolter rules too! Mitsman phandaal, PowerHungryMonkey, Radiation and 3 others 6 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5246617 Share on other sites More sharing options...
Bjorn Firewalker Posted February 2, 2019 Share Posted February 2, 2019 Great job on the Terminators! Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5247266 Share on other sites More sharing options...
Mitsman Posted February 3, 2019 Author Share Posted February 3, 2019 Thanks Bjorn! They really tired me with all these details but I think they were worth it. Next in line the five Intercessors and the Lt Calsius. There is another big 30k apocalypse game mid April and we aim for 50k+ points per side. I am already at 6,1k with 2 detachments and a lord of war (thunderhawk). Let's see how much I can paint for both 30k and 40k until that time!!! Mitsman Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5247961 Share on other sites More sharing options...
Brother Mayhem Posted February 3, 2019 Share Posted February 3, 2019 Looks like the Beta Bolter rules came out in time for you, lovely work and I always liked classic terminators! Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5248064 Share on other sites More sharing options...
Mitsman Posted February 8, 2019 Author Share Posted February 8, 2019 (edited) Hey guys, Time for a minor update. All 5 primaris intercessors and Lt Calsius are painted with basic colours and are washed and shaded with liquid talent. Next step is the highlights! No pics this time I'm afraid as there is quite a mess on the desk and no place to take them. Maybe tomorrow... On another note, I learned something new today. Do not use your brand new brush to apply washes, they dry too quick and it is pain in the bottoms to clean it up. I have probably removed half of its life today just doing that. Oh well it was not THAT expensive... Mitsman EDIT: typing mistakes... Edited February 8, 2019 by Mitsman Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5251931 Share on other sites More sharing options...
Mitsman Posted February 9, 2019 Author Share Posted February 9, 2019 Quick picture of current progress. 4 out of 6 primaris in picture. Slowly getting there. Mitsman Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5252389 Share on other sites More sharing options...
PowerHungryMonkey Posted February 9, 2019 Share Posted February 9, 2019 The Terminators are looking great. Say what you will about Ultra Smurfs, lackeys of the Emperor and all that, but a well painted Ultramarines force ALWAYS looks awesome. Well done brother Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5252626 Share on other sites More sharing options...
Mitsman Posted March 16, 2019 Author Share Posted March 16, 2019 It took me another month to finish the 5 Intercessors but I have done it. Below is Intercessor combat squad "Tilemahos" being led by the sergeant himself. The squad does not have any grenade launchers unfortunately as the basic models are from Dark Imperium and the Sergeant is the limited edition one with the extra back banner from 30K. I will probably convert 2 of them for the next combat squad. The target is to have 10 models with an extra sergeant, one with a fist and one with a power sword so I can either use a full squad or two individual squads each with its sergeant. As always I prefered to hand paint the markings instead of using transfers. Results may vary... There is still plenty of space on the armour and the guns so little markings and battle honours may be added in time. Onwards to finishing Lieutenant Calsius! Ohhh and I have finished all the work on the Contemptor dreadnought with magnets for 8 weapons! 2 twin autocannons, 2 twin lascannons, 1 kheres assault cannon, 1 multi-melta, 1 power fist with built-in flamer and 1 top missile launcher. Nowadays I design for both 30K and 40K if I can. The dread is already undercoated black and work has started on the basic colours. I wanted to use the air-brush here, but I never have enough time for one long session so I decided to use the paintbrush and apply lots of thin coats :) Mitsman space wolf, Tallarn Commander, Bjorn Firewalker and 1 other 3 1 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5277495 Share on other sites More sharing options...
Bjorn Firewalker Posted March 17, 2019 Share Posted March 17, 2019 Excellent works. Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-5278038 Share on other sites More sharing options...
Mitsman Posted August 24 Author Share Posted August 24 Mitsman is back and alive! After a short(?) break of a few weeks (years) due to moving house, covid, and a huge pressure from work, I feel like I am ready to be back. I left at the middle, more or less, of 8th edition 40k and late 1st edition HH. I never played a game of 9th and never touched even the rules of 10th. Having done some work for HH2, I am now committed to HH3 and have started porting all my mk2 to mk7 marines (I refuse to use the stupid firstborn name) to HH3 along with most of the vehicles. You will be seeing real progress from me in the next few weeks, at least until work makes me forget my name again... Mitsman Heraclite, space wolf and Dr_Ruminahui 1 2 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-6129453 Share on other sites More sharing options...
Mitsman Posted August 30 Author Share Posted August 30 So, first WIP for a long time... Having moved over to 30k now, I started work on this 10x plasmagun TSS last year and managed to reach to this point of completeness lately. They are missing the markings basically which will be hand painted as with everything else. The sergeant was supposed to have an artificer armour but then HH3.0 happened! Doesn't matter, I like the differentiation of the unit leader. The army is using a lot of elements from my older 40k armies so I chose for a post Calth, post Terra theme to be able to use mk7 and chest eagles without remorse... They are my toy soldiers and I am not throwing them away damn it! Some of you might notice that the sergeant carries an auspex. I got carried away from 40k and when I glued it on it was already too late... I will have to probably paint and glue another one on a normal marine at some point. That's it for now. More WIP and goodies coming up ! Mitsman kabaakaba, Dr_Ruminahui, Grotsmasha and 1 other 1 3 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-6130328 Share on other sites More sharing options...
Mitsman Posted September 5 Author Share Posted September 5 (edited) Just took fresh pictures of more WIP. The first 5 of 9 man Heavy Support Squad with lascannons. This unit started in HH2 and is close to finishing. The first 5 are close to ready and then I have to finish rebasing to 32mm and touching up the other 4 that have been repurposed from my old 40k devastator squad. Why 9 you say? Well I have run out of lascannons and I do not want to buy a whole box just for the one and ebay has ridiculous prices for just a lascannon set. So for now, they will remain at 9. Also, the Land Raider BEFORE AFTER This land raider has been part of my army in 40k since probably the end of 3rd edition. I decided to repurpose it for 30k and do some touch ups like changing the gun covers to black, changing the old transfers, which meant using a sandpaper, which meant I had to redo the blue, which takes us where I am now really... I added the middle lascannon guns as this is now an upgrade and hopefully it will be completed in a better state that he one it was before. In other news, I have been working also on some characters. They are in demand nowadays in HH3 so how could I resist? From left to right: Praetor with thunder hammer and pistol, my 6th or thereabouts Librarian with force sword, Centurion/Master of Descent with twin claws and jump pack, Cataphractii Primus Medicae with needle pistol, and Cataphractii Centurion/Delegatus/Warmonger with combi-melta and chainfist. That's all for now folks! Mitsman Edited September 5 by Mitsman Grotsmasha, Dr_Ruminahui, Tallarn Commander and 2 others 3 2 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-6131052 Share on other sites More sharing options...
Mitsman Posted Tuesday at 04:34 PM Author Share Posted Tuesday at 04:34 PM (edited) So, while I wait for the pictures of my finished lascannon and plasmagun squads to take themselves, here is a small tutorial on how to go from 25mm to 32mm bases the slow and stupid way a.k.a. I want 32mm bases but I cannot be bothered... So here is my what-to-avoid way... Is your mini on a slota base? Then just glue your 25mm base on a 32mm base. Especially useful if your mini is an old metal one. Cover the 25mm with cork around it, fill the gaps with your favourite filler, sand, whatever and you end up with a hidden 25mm base on a 32mm base. Voila! Is your mini on a normal 25mm base? Then take your trusty cutter and cut slowly around the vertical part of your base. You will be left with a thin black disk that was your old base. Glue it on a 32mm base and redo slight step on the edges of the new base only... Yes I know this is a lame I do not want to rebase way and I also cannot be bothered with base extenders way but it is a different way . Mitsman Edited Tuesday at 04:35 PM by Mitsman phandaal, Bouargh and Firedrake Cordova 2 1 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-6134365 Share on other sites More sharing options...
Tallarn Commander Posted 4 hours ago Share Posted 4 hours ago This rebasing method looks quite effective. I’ll have to give it a shot. Firedrake Cordova 1 Back to top Link to comment https://bolterandchainsword.com/topic/305134-mitsmans-ultramarines-blog-of-awesomeness/page/7/#findComment-6134673 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now