Jump to content

WarriorFish

Recommended Posts

Great to see you vowing Quneitra, the entrants list has been updated once more :)

 

If everyone could double check it to confirm that there are no mistakes in the list that would be a great help. The ranks in (brackets) signify that there are "open" vows that haven't been fully completed, so that means further promotions are available. This doesn't reflect any non-vows though, i.e. if you haven't made a secondary vow as part of the Heroes event it doesn't mark any potential promotions missed out on (as by not vowing you don't have the potential promotions!).

Either is fine, but generally best to post up updates as you have them I find. Easier for people to notice your work and comment on it smile.png

I, WarriorFish, of the 144th Arukan, do hereby vow to complete 1 Platoon Commander from Codex: Astra Militarum Imperial Guard for the Regiments of the B&C Heroes of the Guard challenge by the 9th October for the honour of the Regiment and the B&C.

gallery_30308_3239_5755.jpg

Through the Warp, to near and far,

To Tallarn, Lethe and Ultramar,

The Emperor points and we obey,

Through the Warp and far away.

  On 9/26/2015 at 8:52 AM, WarriorFish said:

Welcome aboard nismo, a couple of good models. Very nice use of wire too, I'm looking forward to seeing these done smile.png We seem to have quite the faithful turn out, must be the fruits of Meh's labours tongue.png

It is but the fruit of the Emperor. I am only the humble gardner.

Story for Jundi Haitham Abdul-Aziz:

  Reveal hidden contents

If this isn't sufficient, please let me know. smile.png

Work continues on the Treads and Thrusters Chimera with another hour logged; details, mainly Agrax Earthshade shading, are being completed. Youtube offers many videos for modern tanks and such and it seems that weathering powders are all the rage. Tanks in the future may feature these products as they are intriguing to behold. Never fear as to the weathering, though, because there will be mud. There will be mud...

 

After the Chimera is complete, an Ogryn will be painted for Heroes of the Guard. Hopefully he will just be akin to painting a guardsman. Maybe less rivets to deal with than a tank, too.

 

Timing is a funny thing, really. I received the Rogue Trader Missionaries Expansion (or some-such thing as well as the Core Rulebook) and I can't produce one for the life of me. The people that have been making and painting them have produced some amazing results for this challenge, though. Well done, everyone.

 

Enough of me rambling.

Your obsession with mud still as strong as ever I see :P Ogryns are good fun, but being used to seeing the older models I didn't quite appreciate how much larger the plastics are so there's a fair bit to paint on them. No rivets that I can remember though ;)

Type-14 'Strigoi' Ion Mortar has finally rolled off the assembly line:http://i148.photobucket.com/albums/s36/coffeegrunt/WP_20150929_00_52_16_Pro.jpghttp://i148.photobucket.com/albums/s36/coffeegrunt/WP_20150929_00_52_44_Pro.jpg

I'll try and get better pictures up later. Recently acquired an airbrush, which has saved lots of time on applying base coats for the various colours. smile.png

Fluff for the Ion Mortar, I'll post Regimental fluff later:

  Reveal hidden contents

If I may ask you a question, Coffee: when you seal the tank and then do the oil washing, are you washing the entire vehicle or just line and dot detailing? The reason I ask is because my Chimera isn't "popping" as I'd like it to with the Agrax Earthshade wash and I think a line and dot detail would do it more justice but I'm not sure.

I, Son_of_D0rn, of the 55th Vostoryan Infantry, do hereby vow to complete Ministorum Priest from Astra Militarum for the Regiments of the B&C: Heroes of the Guard challenge by the 9th October for the honour of The Imperium, Holy Terra and B&C.

 

http://i1198.photobucket.com/albums/aa447/ratvan85/20150929_193327_zpsblmx6hu8.jpg

Another priest, and a great model at that! Good stuff :)

 

Don't forget that the cut off for enlisting is soon approaching - 2nd October 20:00 GMT, that's in a couple of days. This also means that there's just over a week left before Heroes of the Guard ends on the 9th so there's no time for dilly dallying troops let's get those models done ;) I've already done the first drafts of my write ups, I'll see if I can get them done and dusted soon :)

  On 9/30/2015 at 7:56 AM, RADU LYKAN said:

Still love the redemptionist models, as he is a character maybe add a back banner with scrolls/open book type stuff on? Or will it be the colour choices that make him stand out?

I'm going to model a "planted banner" on his base to make him stand out more, possibly in amongst a small pile o' skulls, originally I was going to use either the Arch Zealot Model, Zealot with Eviscerator or the Zealot with Massive Axe but I cannot get into the loft at the moment due to a car accident last week that has left my shoulders rather sore so climbing/lifting/clambering is out of the question. 

 

Also the fact that I plan on painting him with a dark black skin tone (Perry Miniatures Somalians esque) might help slightly, I plan on doing this with my Commissar model as well

  On 9/29/2015 at 6:26 PM, Mehman said:

If I may ask you a question, Coffee: when you seal the tank and then do the oil washing, are you washing the entire vehicle or just line and dot detailing? The reason I ask is because my Chimera isn't "popping" as I'd like it to with the Agrax Earthshade wash and I think a line and dot detail would do it more justice but I'm not sure.

 

For the body of the tank, I use Seraphim Sepia applied all over, mainly with the aim of getting it into recesses. If you seal the base coat with a gloss varnish, this is much easier and limits the 'staining' you get where small amounts of the wash tint the colour of the flat areas of the vehicle. This time around the weather was not being compliant, so I applied the wash without a gloss coat, and simply sealed over the paintwork after also doing the drybrush highlights and paint chipping with Purity Seal.

 

Oil washes I use are Burnt Umber and Black. I only really use the Umber on moving parts, as it really looks good as a sort of copper grease and gives a believably oily look. Black goes over all the metallics. I want to try and get a few more oil paints to test using them on other stuff, so the next vehicle I do might be washed solely with oil paints to try that out. The colour seems to be much richer, so I'm hoping it'll pay off.

 

/Edit/

 

Regimental Fluff:

 

  Reveal hidden contents

 

  On 9/14/2015 at 10:47 PM, Audemus said:

I, Audemus of the Hazardous Environment Response Cavalry (H.E.R.C.) Strike Force, do hereby vow to complete these Imperial Guardsmen and Company Command for the Regiments of the B&C Heroes of the Guard by the 9th October for the honour of Holy Terra and the B&C.

====

I included a top down view so you could see the back row. I left the plastic parts out because it would just be one big mess, needless to say each torso has all of the necessary parts to create a bouncing grizzled guardsmen for H.E.R.C. With Armies on Parade coming up, I may not be able to finish their accompanying Chimera's but worry not they shall ride into battle in armored beasts with auto-cannons mounted on top.

http://i.imgur.com/GhO9k0k.png

(Updated Vow)

I, Audemus of the Lions of Leander VI, do hereby vow to complete these Imperial Guardsmen and Company Command for the Regiments of the B&C One For All by the 9th October for the honour of Holy Terra and the B&C.

(The Commissar came along for style points don't mind him. cool.png )

http://i.imgur.com/KQVZwGC.png

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.