Sersi Posted September 9, 2009 Share Posted September 9, 2009 Here is another option link, its a bit more expensive but they are actual stainless steel balls 1.0 mm, 1.5 mm, and 2.0 mm. TS The terminator seen here uses 1.0 mm balls for the rivets and a 2.0 mm ball for the belt buckle. That terminator looks really big- I think 1mm balls may be to big for rivets on Lamenter's models. It certainly is big, but the 1.0 mm revets work fine, look at the rivets compared to the models stock GW head. I bought some myself and they work fine. The glitter beads that I bought are 0.5, 0.6, 0.75 mm though, so you can go smaller with those, just use a slightly smaller drill bit, than the beads diameter. Link to comment Share on other sites More sharing options...
Lamenter Posted September 13, 2009 Author Share Posted September 13, 2009 The Grandt Line rivets I use come in 0.032", 0.043" and 0.063" diameters. I've only used the first two (smaller sizes) both of which can be seen on this almost finished Mark III. Note the Mark III is still awaiting the appropriate backpack and is shown here with one from a Mark IV. http://www.masteroftheforge.com/images/september09/alsquad7small.jpg Larger image here. Link to comment Share on other sites More sharing options...
Night Runner Posted September 13, 2009 Share Posted September 13, 2009 You've got talent man. I wish I could sculpt so well at this scale. :o May the Emperor bless your work. Link to comment Share on other sites More sharing options...
koran Posted September 13, 2009 Share Posted September 13, 2009 These are looking damn nice. MORE!!! Link to comment Share on other sites More sharing options...
Lamenter Posted September 17, 2009 Author Share Posted September 17, 2009 These are looking damn nice. MORE!!! Ask and the Emperor delivereth! http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinalsmall.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal1.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal3.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal5.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal7.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal9.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal11.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal13.jpg http://www.masteroftheforge.com/images/september09/finishedalpha/alsquadfinal15.jpg Next up will be the long awaited Terminator Squad, and a tutorial for a basic marine. Link to comment Share on other sites More sharing options...
Justin Kase Posted September 17, 2009 Share Posted September 17, 2009 Wow - just incredible! How the heck do you sculpt the hoses? Normally I just see people use guitar string. Link to comment Share on other sites More sharing options...
Lamenter Posted September 17, 2009 Author Share Posted September 17, 2009 Wow - just incredible! How the heck do you sculpt the hoses? Normally I just see people use guitar string. Just thinly rolled GS, attached in the position you want it, then allow an hour to firm up before scoring the detail on with a sharp knife. Very simple, just don't add the detail while it's soft. :) Problem with guitar string is it only bends so far, and so is hard to shape. It is good for longer cables however. Link to comment Share on other sites More sharing options...
Lamenter Posted October 14, 2009 Author Share Posted October 14, 2009 Terminator anyone? :) http://www.masteroftheforge.com/images/october09/Terminator1.jpg http://www.masteroftheforge.com/images/october09/Terminator2.jpg http://www.masteroftheforge.com/images/october09/Terminator3.jpg http://www.masteroftheforge.com/images/october09/Terminator4.jpg http://www.masteroftheforge.com/images/october09/Terminator5.jpg http://www.masteroftheforge.com/images/october09/Terminatorcompsmall.jpg click for larger image Link to comment Share on other sites More sharing options...
cathar the great Posted October 14, 2009 Share Posted October 14, 2009 Wow that Terminator is amazing! Are you going to build more of them? Link to comment Share on other sites More sharing options...
Lamenter Posted October 14, 2009 Author Share Posted October 14, 2009 Wow that Terminator is amazing! Are you going to build more of them? There's 5 more currently in the works, for a 6 man squad. They're all going to receive magnetized arms for a full range of options (I think 16 pairs all together). Obviously the Crux Terminatus isn't finished yet, and he could do with a few details but otherwise this one's pretty much finished. Link to comment Share on other sites More sharing options...
1stCoBattleBro Posted October 14, 2009 Share Posted October 14, 2009 Dude those are awesome! Link to comment Share on other sites More sharing options...
Dragonkin Arenis Posted October 14, 2009 Share Posted October 14, 2009 That. Terminator. Is. Sexy. Oh good lord, I have to get a commission off you!!! ^_^ Good-looking Alpha Legion, too, any particular reason why they have Storm Bolters and Power Weapons? Is the commissioner going to use them as termies for games, or something? Arenis Link to comment Share on other sites More sharing options...
wiplash Posted October 14, 2009 Share Posted October 14, 2009 the termies ffet and greaves are a tad chunky but still ausome work Link to comment Share on other sites More sharing options...
Terrible_Trygon Posted October 14, 2009 Share Posted October 14, 2009 YES. YES! Finally a terminator suit that makes sense. Though the leg pistons don't really look like pistons. And making them look like pistons would give the armour that 'heavy' feel. Link to comment Share on other sites More sharing options...
Lamenter Posted October 14, 2009 Author Share Posted October 14, 2009 YES. YES! Finally a terminator suit that makes sense. Though the leg pistons don't really look like pistons. And making them look like pistons would give the armour that 'heavy' feel. Thanks... but pistons? I'd agree pistons would add to the 'heavy' look but I don't recall any Terminator models with leg pistons. Link to comment Share on other sites More sharing options...
Tutteman Posted October 14, 2009 Share Posted October 14, 2009 Since joining the B&C I have slowly added to my list of people I hate out of envy...you've just got up there Lamenter... ;) Nice work, and please keep posting pics for us. Link to comment Share on other sites More sharing options...
Terrible_Trygon Posted October 14, 2009 Share Posted October 14, 2009 YES. YES! Finally a terminator suit that makes sense. Though the leg pistons don't really look like pistons. And making them look like pistons would give the armour that 'heavy' feel. Thanks... but pistons? I'd agree pistons would add to the 'heavy' look but I don't recall any Terminator models with leg pistons. Wait, this is something the Chaos terminators look like they have, not the Loyalist terminators... My bad. Link to comment Share on other sites More sharing options...
Lamenter Posted October 14, 2009 Author Share Posted October 14, 2009 Wait, this is something the Chaos terminators look like they have, not the Loyalist terminators... My bad. Certainly something to include when I try my hand at the Traitor versions. Link to comment Share on other sites More sharing options...
sgtNACHO Posted October 14, 2009 Share Posted October 14, 2009 :rolleyes: :lol: I love These guys! I saw those guys at the top of the page and I knew you were the beez knees! But then the squad and I thought you must be the 19th Primarch! But then the Terminator came out... :( :( Why? Whats wrong with you? Are you mental? Do you have any idea what a terminator looks like? Apparently so! That is the coolest thing, short of Cheese in a can, Ever!! You must be the Emperor and all 20 Primarchs in one!!! Honestly why would the Imperium name one of the unluckiest chapters in history after your greatness? Doesn't seem fair to you ;) Good Luck, and keep going, I feel that if you don't get these completed I will send an Inquisitor to make you finish them!! :D Link to comment Share on other sites More sharing options...
Lamenter Posted October 23, 2009 Author Share Posted October 23, 2009 Thanks sgtNACHO, I hope I can live up to that level of praise with future projects. Here's the rest of the Terminator's Squad. Because each model has 3 pairs of interchangeable arms, I've had to label each one for the time being so I don't get them mixed up. http://www.masteroftheforge.com/images/october09/terminatorsquadsmall.jpg Click for larger image. Link to comment Share on other sites More sharing options...
Shortsonfire79 Posted October 24, 2009 Share Posted October 24, 2009 Oh lordy..those are fantastic. I can't wait to see where you go with the detailing. Hot damn that'll be epic. Link to comment Share on other sites More sharing options...
Krait Posted October 24, 2009 Share Posted October 24, 2009 bababababababababbbababba!! WOW THAT TERMIE IS... I don't even know how to say it...(in a good way :() Well what I can say is I can't wait for the tutorial! Link to comment Share on other sites More sharing options...
Hetacondries Posted October 24, 2009 Share Posted October 24, 2009 Some fantastic work here brother. Great work. Link to comment Share on other sites More sharing options...
Reyner Posted October 24, 2009 Share Posted October 24, 2009 Tutorial for those Terminators perhaps? :) Link to comment Share on other sites More sharing options...
Lamenter Posted November 3, 2009 Author Share Posted November 3, 2009 Tutorial for those Terminators perhaps? ;) Yep, the Marine tutorial is nearly done. Terminator tutorial to follow before the end of the year. Here's a a bit more on the Terminators, with my own Bane-Raider for effect. Planning to have these finished very soon. http://www.masteroftheforge.com/images/november09/squadraidersmall.jpg Click on for larger image. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.