YannTheMad Posted May 31, 2023 Share Posted May 31, 2023 The scale seems perfect to me. If anything, the slauther-bound seems a little more "lean", but than again I think it might just be an effect of the leg armor being different. But anyway he's turning out awesome. Pretty nice conversion ^^ KrautScientist and Firedrake Cordova 1 1 Back to top Link to comment Share on other sites More sharing options...
Firedrake Cordova Posted May 31, 2023 Share Posted May 31, 2023 Looks great to me! Link to comment Share on other sites More sharing options...
KrautScientist Posted June 1, 2023 Author Share Posted June 1, 2023 Cheers, guys! @YannTheMad Yeah, the leg armour is the one area where the model obviously diverges from "true" Eightbound -- that and the Slaughterpriest is an almost ridiculously lean model to begin with, but at least it's easy enough to suitably bulk up his upper half... Link to comment Share on other sites More sharing options...
Pearson73 Posted June 1, 2023 Share Posted June 1, 2023 Slaughterbound is coming on strong, I actually prefer the more lean build, but it also makes sense that these guys would grow and mutate in different ways. He's armed with a pole-arm, so growing longer and gaining extra reach seems pretty appropriate to me! Firedrake Cordova 1 Back to top Link to comment Share on other sites More sharing options...
KrautScientist Posted June 3, 2023 Author Share Posted June 3, 2023 Thanks, @Pearson73! Yeah, I think it kinda works, in context: The Slaughterpriest version has a very gladiatorial look to it, which is definitely a good fit for a World Eaters army. That being said, I have seen some conversions of the model where it never really ended up looking enough like an Astartes due to the difference in build -- the Eightbound parts are pulling a lot of weight in that respect! So anyway, here's another update on the kitbashed Eightbound, as things are really getting serious: The build has been cleaned up even further -- it probably doesn't look like too big an improvement, but that'll change in a minute when we take a look "under the hood", so to speak. Before we do that, let me point out the one area that will still need a tremendous amount of fine tuning: The back of the model: As you can see, the backpack is still only being held in place with a blob of poster tac. But I have already built up the beginnings of the GS work that will form a more natural, if warped-looking, point of attachment, to match the general look on the rest of the models. Let's take the armour off for a minute, though, to show you what I did with the neck and shoulders: I was feeling slightly clever, so I made a quick GS copy of some actual Eightbound shoulders and spliced them in. The stock slaughterpriest neck portion was carefully shaved away directly above the pectorals, and the Eightbound shoulders and neck - which turned out to be an almost perfect fit - were added on top. Granted, it's not perfect, but it's certainly a lot better than anything I could have sculpted from scratch! I also wasn't super-neat about the areas where the arms attach, seeing how most of this would end up being covered by the shoulder pads. That being said, if it looks very wonky in the pictures, that's because the arms are still loose -- I will keep the model in separat parts for as long as I can, as that should make the painting process a lot easier. And like I said, those seams will be hidden underneath the pauldrons anyway, so there's no need to make things to stressful for myself As always, let me know what you think! Kurgan the Lurker, Brother Chaplain Ryld, Khornestar and 3 others 4 2 Back to top Link to comment Share on other sites More sharing options...
Naryn Posted June 3, 2023 Share Posted June 3, 2023 Really elegant work! I think you hit the nail on the head with this combination of bits. He looks slim and lethal. The only sticking point for me is the spiked hood behind his head; I assume you're going to do a little more greenstuff work on it to blend it in? It could even hook into the backpack to really integrate that portion of the model together. Excited to see what you do! KrautScientist 1 Back to top Link to comment Share on other sites More sharing options...
Firedrake Cordova Posted June 3, 2023 Share Posted June 3, 2023 I'm continually impressed by your work in this project KrautScientist 1 Back to top Link to comment Share on other sites More sharing options...
Grotsmasha Posted June 3, 2023 Share Posted June 3, 2023 Man, you and Augs continue to have the best posed models, they're all coming up aces KrautScientist and Firedrake Cordova 2 Back to top Link to comment Share on other sites More sharing options...
KrautScientist Posted June 3, 2023 Author Share Posted June 3, 2023 Cheers for the kind words, everyone! I really appreciate it! @Naryn Oh, you are quite right: In fact, I am hard at work on that cowl/backpack situation right now! @Firedrake Cordova That is very kind of you to say! @Grotsmasha Knowing Augs' models, that is a great compliment indeed! In the meantime, here's a little something I don't believe I have already shared over here: There’s another conversion that has been on my mind ever since I realised that one of the Eightbound chest armour pieces is conspicuously reminiscent of Angron’s own armour — maybe another version of the Lord Primarch might be in order…?! In fact, it’s absolutely baffling to me how almost nobody seems to have considered the Eightbound kit as a source of a possible plastic Angron conversion so far — except, of course, for the true master of Angron conversions, REG, who is already hot on the case… BadgersinHills, Brother Chaplain Ryld, YannTheMad and 1 other 1 3 Back to top Link to comment Share on other sites More sharing options...
YannTheMad Posted June 4, 2023 Share Posted June 4, 2023 This is a brilliant idea ideed. Honestly , I find working with metal model really hard,but I'm sure you'll pull off something awesome. Just don't use that square base XD And you're right, eightbounds heads are just perfect for an homemade Angron Link to comment Share on other sites More sharing options...
BadgersinHills Posted June 4, 2023 Share Posted June 4, 2023 Lovely work as always. Link to comment Share on other sites More sharing options...
KrautScientist Posted June 4, 2023 Author Share Posted June 4, 2023 Cheers, guys! @YannTheMad, Yeah, working with a metal model wouldn't be my first choice either, but that old Archaon model has the distinct advantage of providing an almost Primarch-like stature, and the design is also a pretty great match for Angron -- maybe I can still come up with a clever plastic alternative, but there's something I really like about that metal model, and it's not like I'd use it for anything else, really. In the meantime, I have been building up the back of the kitbashed Eightbound a bit: This area will still require more cleanup and polish once everything is nice and dry, but the general shape is there now. While I was at it, I also added a few bits and bobs to the backpack, in order to bring it in line with the official Eightbound backpacks: As always, let me know what you think! TrawlingCleaner, ZeroWolf, Brother Chaplain Ryld and 6 others 4 5 Back to top Link to comment Share on other sites More sharing options...
Firedrake Cordova Posted June 4, 2023 Share Posted June 4, 2023 Looks good to me! Link to comment Share on other sites More sharing options...
Gederas Posted June 8, 2023 Share Posted June 8, 2023 Looking good! Also I feel that Slaughterpriest has been used for everything but it's original intended use more often than not, no? Link to comment Share on other sites More sharing options...
YannTheMad Posted June 10, 2023 Share Posted June 10, 2023 The greenstuff work is turning out great so far ^^. The backpack is... well backpack-y i guess Keep up ^^ the slautherbound is looking great ^^ Link to comment Share on other sites More sharing options...
KrautScientist Posted June 19, 2023 Author Share Posted June 19, 2023 Cheers, guys! Regarding the Slaughterpriest, it is such a strange model, in many ways: The scale and anatomy seem so different that it not only stands out from the rest of the Blades of Khorne -- it could almost be from a different line of models or manufacturer altogether. I also nearly did a spit take when I realised that the character's looks is basically almost identical to the "Uber Immortal" from the film "300" (go ahead, google it!) But it is a great source for conversions, with its almost Primarch-like stature, and as we have seen, it works really well as an Eightbound stand-in. Which reminds me, I totally forgot to post another round of pictures of the almost finished model (haven't done any more work on it, though): And here's another look at th "squad" so far (no longer legal by 10th Ed. standards, I gather -- but, frankly, who cares, eh? I have also finally managed to get my hands on the Horus Heresy Praetor witht he double-handed axe, a model I have wanted to convert into a Master of Executions for a while now. When I first came up with the idea, it still felt fresh and wild -- but in the meantime, everybody and their cousin have been using the exact same approach, so I'll have to get creative to end up with a model that still manages to stand out So I am still at the - super-early - moment in time where I just throw around random bitz and try to find out what sticks: As always, let me know what you think! DaBoiKyknos, Xin Ceithan, Dr_Ruminahui and 7 others 5 5 Back to top Link to comment Share on other sites More sharing options...
Leviathus Posted June 20, 2023 Share Posted June 20, 2023 The squad looks super vicious! Amazing job man :D Firedrake Cordova 1 Back to top Link to comment Share on other sites More sharing options...
apologist Posted June 20, 2023 Share Posted June 20, 2023 Master of Executions is looking spiffy. Tweaking that volkite pistol holster would be a neat way to make the model more of your own and add some narrative appeal. Perhaps the Master of Executions is an ex-Librarian who has voluntarily been 'collared' to suppress his psychic might? The padded, cushioned neckguard then has a purpose, and you could have a lot of fun with lighting there. The pistol holster could then be adjusted into a scroll caddy, or perhaps a holster for the Dread Tome of Reckonings, in which the bearer records particularly notable foes that the warband must capture for him to execute? Firedrake Cordova 1 Back to top Link to comment Share on other sites More sharing options...
Firedrake Cordova Posted June 20, 2023 Share Posted June 20, 2023 (edited) Looks good to me - nice greenstuff work on the back of the Slaughterpriest! Although, I'm not sure the chain-polearm is long enough (I know it's a stock part) The Master of Executions looks like a good start - I like the bulk of the model; it reminds me of the Warhammer+ subscription Chaos Terminator for some reason ... Edited June 20, 2023 by Firedrake Cordova Link to comment Share on other sites More sharing options...
ZeroWolf Posted June 20, 2023 Share Posted June 20, 2023 That is looking great Link to comment Share on other sites More sharing options...
Naryn Posted June 20, 2023 Share Posted June 20, 2023 3 hours ago, Firedrake Cordova said: Looks good to me - nice greenstuff work on the back of the Slaughterpriest! Although, I'm not sure the chain-polearm is long enough (I know it's a stock part) The Master of Executions looks like a good start - I like the bulk of the model; it reminds me of the Warhammer+ subscription Chaos Terminator for some reason ... Now that you mention it, I do think he'd look pretty good with a chainfist! Link to comment Share on other sites More sharing options...
BadgersinHills Posted June 20, 2023 Share Posted June 20, 2023 Great work on the Slaughterpriest conversion! Master of Executions looks promising. The left pauldron could be bigger though to go with his size. Link to comment Share on other sites More sharing options...
DaBoiKyknos Posted June 20, 2023 Share Posted June 20, 2023 Hey @KrautScientist: Cool conversion-work as always! Could you please tell me where you got the chaos mutation sprue from which you used for the berzerkers on page 4 of this thread? Been searching for those for ages. Thanks in advance! Link to comment Share on other sites More sharing options...
Volgon Posted June 20, 2023 Share Posted June 20, 2023 Love Master of Executions conversions so excited to see where this one goes! Link to comment Share on other sites More sharing options...
YannTheMad Posted June 23, 2023 Share Posted June 23, 2023 The slautherbound is just awesome ^^ Is it just a perspective or is he even taller than the "normal" ones ? I'll be honest I'm not too sure about the master of executions. He looks a little static to me... Also, I'm not usually a big fan of huge weapons, but I do feel as if his axe is a little small for its decapitating role. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now