Warsmith Uveron Posted July 5, 2016 Share Posted July 5, 2016 Now there's a detail that I would really like to hear your thoughts on: My original plan was to use the full set of armour plates that come with the kit, i.e. a breastplate, the two upper-thigh plates, a set of vambraces, a skull-shaped shoulder pad and the two smaller tilting plates that attach to either side of the breastplate. But now that I have added the breastplate and thigh-armour, I find myself reluctant to cover up more of the red skin: I really like the look of the bare shoulders and the part where you can just glimpse the musculature of the daemon beneath the breastplate, and I am beginning to feel like adding more of the armour would actually diminish the coolness of the model -- I'd love to hear your thoughts on this matter! Its looking Great Kraut. I think a Shoulder un-covered may look cool, not sure about leaving both bare. But I think you are right, adding lots of Armour would cover the great paint job. Link to comment Share on other sites More sharing options...
Augustus b'Raass Posted July 5, 2016 Share Posted July 5, 2016 Boom! 100 pages. Congratulations on this epic tome, KrautScientist! Warsmith Uveron and KrautScientist 2 Back to top Link to comment Share on other sites More sharing options...
KrautScientist Posted July 5, 2016 Author Share Posted July 5, 2016 Cheers, guys! @ Uveron: There's only one shoulder pad anyway, though, so the question is either to have one armoured shoulder or none at all. And the armoured shoulder would have to be the right one, as the shoulder pad sits rather awkwardly on the left shoulder, due to the proximity of the wings. @ Augs: Thanks, buddy! Any ideas about the matter at hand, though? I'd love to hear your take! Link to comment Share on other sites More sharing options...
Daemon2027 Posted July 5, 2016 Share Posted July 5, 2016 As much a so would agree it would be a shame to cover the beautiful paint job I think it needs a shoulder pad. Looks a little like he's wearing a tube top Link to comment Share on other sites More sharing options...
Augustus b'Raass Posted July 5, 2016 Share Posted July 5, 2016 I think he would benefit from that one skull shoulder guard, with one of the side plates. The vambraces can be left off, indeed. :) Link to comment Share on other sites More sharing options...
Mechanist Posted July 6, 2016 Share Posted July 6, 2016 You have a fair number of models with the single shoulder covered for the gladiator look. I reckon one will help tie the deamon in with the rest of the 4th expecially with the black armour red skin combo. Your really bringing your A game here mate, grea job so far. KrautScientist 1 Back to top Link to comment Share on other sites More sharing options...
KrautScientist Posted July 6, 2016 Author Share Posted July 6, 2016 Thanks for the feedback, guys! :) After much deliberation, I have decided against the shoulder pad: I mocked it up in place, and it ended up covering too much of the skin, just as I had suspected it might. This is basically a first for me, as I am a huge fan of extra detail and additional armour, but just this once, less indeed seems to be more. I might still add the vambraces at a later point, but for now I think we can call the model itself finished: http://images.dakkadakka.com/gallery/2016/7/6/811795-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG Let me just say that painting that whip was yet another exercise in patience, pretty much on par with the wings ;) http://images.dakkadakka.com/gallery/2016/7/6/811798-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG http://images.dakkadakka.com/gallery/2016/7/6/811801-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG http://images.dakkadakka.com/gallery/2016/7/6/811797-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG http://images.dakkadakka.com/gallery/2016/7/6/811800-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG http://images.dakkadakka.com/gallery/2016/7/6/811796-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG http://images.dakkadakka.com/gallery/2016/7/6/811799-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG http://images.dakkadakka.com/gallery/2016/7/6/811802-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG So with the model now finished, that just leaves the base to be constructed and painted - a project that should keep me occupied until the weekend ;) With a bit of luck, I'll be able to post the finished piece before the cutoff on Saturday. Until then, as always, let me know what you think! :) http://images.dakkadakka.com/gallery/2016/7/6/811803-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Khorne%2C%20Work%20In%20Progress.JPG Biohazard, DarkVen, Kizzdougs and 5 others 8 Back to top Link to comment Share on other sites More sharing options...
Augustus b'Raass Posted July 7, 2016 Share Posted July 7, 2016 He looks amazing, Kraut! Well done. And with almost five weeks to spare for the ETL! Can't wait to see him on a base. Nudge nudge, wink wink. Link to comment Share on other sites More sharing options...
Biohazard Posted July 7, 2016 Share Posted July 7, 2016 Bloodthirsters looking great buddy. Looking forward to seeing what you come up with for the base. I have the same dilemma re the armour plates. I'm still unsure if I'll add any to Skarbrand. I haven't painted the whip yet but after painting the tattered wings I'm not particularly looking forward to it. Link to comment Share on other sites More sharing options...
KrautScientist Posted July 7, 2016 Author Share Posted July 7, 2016 (edited) Thanks a lot, guys! @ Biohazard: There's actually only one really bad part about the whip, buddy: the spikes. I'll say this: Sit down, relax, and then do them in one go, painting all of the spikes on one segment of the whip, then go on to the next segment, etc. Once the spikes are done, the rest is a breeze by comparison! So I said the base would be taking me until the weekend, right? But I couldn't leave he model alone, and so, after a frantic building session that lasted until late at night, here's the final update regarding the Bloodthirster. I give you... Ghor'Lash'Kharganath, the Gorelord, the Ever-Wrathful, Chosen Hunter of Khorne http://images.dakkadakka.com/gallery/2016/7/7/812021-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.jpg http://images.dakkadakka.com/gallery/2016/7/7/812022-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.jpg http://images.dakkadakka.com/gallery/2016/7/7/812023-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.jpg http://images.dakkadakka.com/gallery/2016/7/7/812024-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.jpg http://images.dakkadakka.com/gallery/2016/7/7/812025-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.jpg http://images.dakkadakka.com/gallery/2016/7/7/812026-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.jpg http://images.dakkadakka.com/gallery/2016/7/7/812027-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.JPG And here's a closer look at the finished base: http://images.dakkadakka.com/gallery/2016/7/7/812028-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.JPG There were several elements I absolutely wanted to incorporate. First and foremost, a symbol of the Imperium's shattered power. I think the shield fills that role rather nicely http://images.dakkadakka.com/gallery/2016/7/7/812032-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.JPG In a bit of an in-joke, the bease also features another helmet from the Golden Legion, my DIY Astartes Chapter created for INQ28: http://images.dakkadakka.com/gallery/2016/7/7/812029-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.JPG And finally, I really liked the idea of the earth itself reacting to the daemon's malign presence where his ironshod hooves touched the ground -- hence the bloody bone spikes jutting from the rock. And in the middle of it all, the Bloodthirster is ascending from a pit of boiling blood on a pillar of fire: http://images.dakkadakka.com/gallery/2016/7/7/812030-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.JPG http://images.dakkadakka.com/gallery/2016/7/7/812031-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.JPG And finally, another closeup of the axe: http://images.dakkadakka.com/gallery/2016/7/7/812033-Bloodthirster%2C%20Chaos%2C%20Daemonkin%2C%20Daemons%2C%20Ghor%27lash%27kharganath%2C%20Greater%20Daemon.JPG I am not going to mince words here: I am incredibly happy with the finished model! From a purely technical standpoint, this is very probably my finest paintjob to date. Oh yeah, and this also means another thing: 3rd ETL Vow finished! As always, let me know what you think! Edited July 7, 2016 by KrautScientist Brother Aiwass, Allart01, Kizzdougs and 11 others 14 Back to top Link to comment Share on other sites More sharing options...
Mechanist Posted July 7, 2016 Share Posted July 7, 2016 Thats a stunning result amd the base finishes it off a treat on a technical level I have to agree that you've outshone yourself. Very well done that man. Link to comment Share on other sites More sharing options...
Evil Eye Posted July 7, 2016 Share Posted July 7, 2016 That is an awesome, awesome model, and a fine centrepiece for any Khorne army. I'd love to see you do the other two Bloodthirster variants too, especially if you went with a different colour scheme for each 'Thirster, perhaps giving the big ol' axe-o-doom (can't remember the name, Insensate Rage was it?) variant coal-black skin with glowing recesses, as if he were composed of molten rock held together by stony skin and pure anger, with the IMO hugely under-appreciated hammer-flail version (Wrath of Khorne?) a glossy, skinless look? In any case, I love that Bloodthirster and I eagerly await your next project. Link to comment Share on other sites More sharing options...
Teetengee Posted July 7, 2016 Share Posted July 7, 2016 Thanks for the paint scheme info.Also, I second at least one shoulderpad, as right now he looks like he is wearing a strapless breastplate which is terribly inconvenient for murderating poor imperials. Link to comment Share on other sites More sharing options...
deathspectersgt7 Posted July 7, 2016 Share Posted July 7, 2016 The Golden D6 thumbs up. Link to comment Share on other sites More sharing options...
Augustus b'Raass Posted July 8, 2016 Share Posted July 8, 2016 Absolutely fantastic work all around on the Bloodthirster, my friend. The base is a finishing touch which rounds up an already stunning model. My only nitpick is his name: Why does it have six instead of eight syllables? ;) Link to comment Share on other sites More sharing options...
KrautScientist Posted July 8, 2016 Author Share Posted July 8, 2016 Thank you kindly, everyone! This has been quite a project for me, and I am happy to hear that you like the big guy as well ;) @ Squigsquasher: To be perfectly honest, I think I've done all I wanted to do with the kit, at least where standard Bloodthirsters are concerned: The other two variants both feature parts that I am not a big fan of (I hate that meteor hammer, for instance), and I've also spent ages going back and forth over whether to paint the skin on my 'Thirster black or red, finally coming to the conclusion that red was preferrable because black skin is so extremely hard to pull off well. So don't expect two more Bloodthirsters from me -- sorry ;) That being said, I do have another Bloodthirster in a box that was given to me as a gift, and like Biohazard, I'll be using him to convert a version of Daemon Primarch Angron, so you can at least look forward to that! ;) @ Teetengee: I think I've already explained my reasoning behind dropping the shoulder pad, and I still stand by that decision. Regarding the question of how his breastplate is fastened, I imagine it's hooked directly into his flesh or something -- after all, those leather straps on his legs don't run all the way around, but are hooked into the very meat of his legs on both sides, so yeah... @ deathspectersgt7: Haha, cheers, mate! I have yet to download my own copy to take a look, but I am glad you seem to like the feature! ;) @ Augs: Cheers, buddy! :) Regarding the name, huh, I didn't even know that requirement -- after all, Skarbrand and Ang'grath also have shorter names like that. I'll tell you that it was complicated enough to come up with a cool and fitting name without having to count the syllables, thank you very much! ;) Link to comment Share on other sites More sharing options...
Khornestar Posted July 8, 2016 Share Posted July 8, 2016 Well done. By far my favorite model in GW's range. It's a pleasure to see every version. Link to comment Share on other sites More sharing options...
DarkVen Posted July 8, 2016 Share Posted July 8, 2016 Awesome model. Awesome work. Any chance of a group shot to see the difference in scale and better feel the immense awesomeness of your Thirster? Link to comment Share on other sites More sharing options...
KrautScientist Posted July 8, 2016 Author Share Posted July 8, 2016 Again, thanks, guys! :) @ DarkVen: That's a really cool idea! So I snapped a quick picture of everything I have painted for this ETL: For the sake of completeness, I have also included the two "bonus models" I painted beyond my vows while I had to wait for the opportunity to pick up some new Chaos Black spray: one rank and file World Eater and an icon bearer for my Traitor Guard. All of these provide a nice enough collections of shapes and sizes, that should give you a good idea of the various models' scale. Brother Chaplain Ryld, Biohazard, Kizzdougs and 4 others 7 Back to top Link to comment Share on other sites More sharing options...
Teetengee Posted July 9, 2016 Share Posted July 9, 2016 Thank you kindly, everyone! This has been quite a project for me, and I am happy to hear that you like the big guy as well -snip- @ Teetengee: I think I've already explained my reasoning behind dropping the shoulder pad, and I still stand by that decision. Regarding the question of how his breastplate is fastened, I imagine it's hooked directly into his flesh or something -- after all, those leather straps on his legs don't run all the way around, but are hooked into the very meat of his legs on both sides, so yeah... -snip- Works for me! Also, the daemon prince that I thought looked a bit wonky looks just fine when in the context of other models, so that is a huge plus as far as I am concerned! Link to comment Share on other sites More sharing options...
Charlo Posted July 9, 2016 Share Posted July 9, 2016 He's so red and angry I love it. Link to comment Share on other sites More sharing options...
Biohazard Posted July 9, 2016 Share Posted July 9, 2016 (edited) Vows look great all together mate. I'll keep that in mind for the spikes. Although I used my Thirster as an Hq today for the first time in a tournament and he was just a bit meh. So I'll maybe leave painting the spikes until Im less ashamed of him and can stand to look at him again :D Edited July 9, 2016 by Biohazard Link to comment Share on other sites More sharing options...
JeffTibbetts Posted July 9, 2016 Share Posted July 9, 2016 I think this model really shows how much progress you've been making as a painter. Frankly, it looks stunning and compared to even a year ago it's so much better. You've always been a good painter, and very prolific, but now you're just kicking it up a notch. Also, that little spike summoning circle is a freaking brilliant idea and very original. Link to comment Share on other sites More sharing options...
Augustus b'Raass Posted July 9, 2016 Share Posted July 9, 2016 (edited) @ Augs: Cheers, buddy! Regarding the name, huh, I didn't even know that requirement -- after all, Skarbrand and Ang'grath also have shorter names like that. I'll tell you that it was complicated enough to come up with a cool and fitting name without having to count the syllables, thank you very much! Aha! Well, you failed to take into account that Ang'grath is just a shortening of his full name. Ang'grath's compete name is Ang'grath Angree McSlashyface. The same holds with Skarbrand. Skarbrand's just a nickname from when that particular daemon was a still a wee little Haemonculous (pre-bloodletter) who got poked with a hot pincer by his mates as a tease. It left an ugly scar on his left buttock, which branded him as the runt of the pack, earning him the nickname 'Skarbrand'. He was bullied and teased even more after that, which angered him so much he killed all his friends and went on a murderous rampage that eventually saw him rise to power and become the Greater Daemon he is today. His real name is Milton Ashley von Stabbyworth. True story. Edited July 10, 2016 by Augustus b'Raass Quixus, Pyroclast91 and Hydra Dominatus 3 Back to top Link to comment Share on other sites More sharing options...
Pyroclast91 Posted July 10, 2016 Share Posted July 10, 2016 @ Augs: Cheers, buddy! :) Regarding the name, huh, I didn't even know that requirement -- after all, Skarbrand and Ang'grath also have shorter names like that. I'll tell you that it was complicated enough to come up with a cool and fitting name without having to count the syllables, thank you very much! ;)Aha! Well, you failed to take into account that Ang'grath is just a shortening of his full name. Ang'grath's compete name is Ang'grath Boo McSlashyface. The same holds with Skarbrand. Skarbrand's just a nickname from when that particular daemon was a still a wee Haemonculous (pre-bloodletter) who got poked with a hot pincer by his mates as a tease. It left an ugly scar on his left buttock, which branded him as the runt of the pack, earning him the nickname 'Skarbrand'. He was bullied and teased even more after that, which angered him so much he killed all his friends and went on a murderous rampage that eventually saw him rise to power and become the Greater Daemon he is today. His real name is Milton Ashley von Stabbyworth. True story. OMG BEST BACKSTORY EVER!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now