Search the Community
Showing results for tags 'Kromlech'.
-
Kromlech - Bedlam Fraternity Legs The link for these can be found here. These were a gift from a friend of mine so I can't comment on any delivery time or packaging. As they are in blister format, I gather they were acquired from an independent stockist (feel free to let me know in the replies and I'll update). Blister: On to the models, there's some flash as expected with resin but no bubbles or warping. Detail is crisp: Front: Back: They are attached to the sprue on the underneath of the feet meaning that no damage will be caused to the model when you removed them (provided you're careful and follow the usual procedure for freeing resin bits from spure of course) Next up is the dryfit. The bits used to demonstrate the model are a power armoured Grey Knights torso with weapons and heads from the Death Company box. The base is an old 25mm one. It's held together with blu-tac. Bar a bit of flash and the underneath of the feet being smoothed out, not much is needed to make a model. The tops of the legs is curved like GWs to allow a torso to fit and the detail on the groin doesn't impede twisting at the hip too much Finally, we have a comparison picture of Kromlech's offering placed alongside some of GW's.
-
Kromlech - Legionary Plasma Cannon The link for these can be found here. For these I used the cheapest postage available; I was told they were dispatched but had no way of tracking them. They arrived after a week (Poland to the UK). These were a gift from a friend of mine so I can't comment on any delivery time or packaging. As they are in blister format, I gather they were acquired from an independent stockist (feel free to let me know in the replies and I'll update). Blister: On to the models, there's some flash as expected with resin but no bubbles or warping. Detail is crisp: Front: Back: Note the lack of backpack. IMO these fit better with either 30k models (well, it is the Legionary line after all) or second edition models. That said, it shouldn't be too hard to source a back pack...? Anyway, on to the dryfit. The model used is a third edition metal Death Company model. It's held together with blu-tac. The design has little lugs for the handle to sit on the cannon and the load baring arm to attach which makes a snug fit once the flash, etc, is removed. Finally, we have a comparison picture of Kromlech's offering placed alongside some of GW's. Have to say, I am becoming a fan of Kromlech
-
Kromlech - Imperial Battle Ruler, Orange The link for these can be found here. In addition to Imperial (Imperium) there are also versions for all the major Factions in 40k: Chaos (Chaos), Avatar (Eldar), Immortal Legions (Necrons), Swarm (Tyranids), Enclave (Tau Empire), and Orc (Orks). They are also available in green and all of the above can be found following the link for Gaming Accessories. Once again the cheapest postage was used and it took just over a week from dispatch to arrive (Poland to UK). No way to track it though... One box (note that this was taped up around the edges to ensure it stayed shut): Safely packed: And bagged: Front view: Dimensions added in black. All the useful sizes includes (they are also printed on the ruler). Each notch is also 1". Side view: About as thick as the current green templates, etc. Same material: i.e. hard plastic, doesn't bend. .. and there you have it. Looking forward to using it in my next game (as we're always misplacing the tap measures).- 5 replies
-
- 3
-
-
- Kromlech
- Third party bits
- (and 2 more)
-
Kromlech - Stygian Torsos The link for these can be found here. For these I used the cheapest postage available; I was told they were dispatched but had no way of tracking them. They arrived after a week (Poland to the UK). One box, tapped up to ensure it arrived: Safely packed: On to the models, there's some flash as expected with resin but no bubbles or warping. Detail is crisp: Front: Back Originally I had one concern and that was with the torso on the right hand side. It is joined to the "sprue" at the collar and I thought I would have to reshape it, but looking at the display picture, it's supposed to be bent: The sash join looks easy to sort out too. All the other joins are in places easy to conceal and smooth, so no concerns there either. Would definitely use Kromlech again.
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: golfdeltafoxtrot’s Raven Guard
-
From the album: Leaks and/or New Stuff
Lug 2 -
From the album: Leaks and/or New Stuff
Lug 1 -
From the album: Leaks and/or New Stuff
CAD -
From the album: Leaks and/or New Stuff
Comparison 2 -
From the album: Leaks and/or New Stuff
Comparison 1 -
From the album: Leaks and/or New Stuff
Back -
From the album: Leaks and/or New Stuff
Side -
From the album: Leaks and/or New Stuff
Front -
From the album: Leaks and/or New Stuff
Back -
From the album: Leaks and/or New Stuff
Fromt -
From the album: Leaks and/or New Stuff
Blister back
