Daimyo-Phaeron Lenoch Posted February 8, 2020 Share Posted February 8, 2020 TITHI acquired a series two Hero, owing to the fact I was near a Barnes and Noble and decided to poke my head in. It was the one with the servo skull. I think I’ll paint him traditionally, as opposed to painting on the sprue. I haven’t painted a terminator for a long time, so I’m looking forward to the task. BitsHammer and PeteySödes 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474024 Share on other sites More sharing options...
Dolchiate Remembrancer Posted February 8, 2020 Share Posted February 8, 2020 TITHI will be building a Squad of rubrics and converting some sorcerors! BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474262 Share on other sites More sharing options...
Sky Potato Posted February 8, 2020 Share Posted February 8, 2020 TITHI used my airbrush for the first time. Which was nice! I primed 120 Catachan Infantry, a Leman Russ with all the weapon options and a Chimera with grey Stynylrez primer, and then base coated 70 of those infantry with Wraithbone thinned down and run through the airbrush. I only stopped because I ran out of Wraithbone. I wish GW would do Wraithbone and Grey Seer basepaints in their Air Paints range - it’s much better priming and basecoating through the airbrush than messing around with spraycans. Oh well. That’s a big dent in the painting queue - and it should get even shorter getting painted with Contrast. There’s a big pile of Sisters, Death Guard and terrain I want to get primed tomorrow. BitsHammer and Magos Takatus 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474366 Share on other sites More sharing options...
painting.for.my.sanity Posted February 9, 2020 Share Posted February 9, 2020 TITH I lost count of how many coats of white I'd painted... BitsHammer, Montford and Viridia 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474605 Share on other sites More sharing options...
Sky Potato Posted February 9, 2020 Share Posted February 9, 2020 TITHI kept going with the airbrush priming. I managed to get the remainder of the Catachans basecoated in Wraithbone, and I primed 30 SoB models, about 120 Death Guard, and got one Armiger Helverin done before the compressor started whinging at me because it had been on for about 2 days straight. So I’ve made a massive dent in my pile of shame, I’ve got the three armies I want to get painted in Contrast ready to throw the actual paint on and most importantly, I’m starting to get to the stage where I’m laying down nice smooth basecoats through the airbrush. So I’ve had a very productive hobby weekend. Awesome. BitsHammer and infyrana 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474626 Share on other sites More sharing options...
treadhead Posted February 9, 2020 Share Posted February 9, 2020 nicely done potato Yithi Bought, base coated, sub assembled, magnetized, painted, assembled, touched up and detailed an invictus tactical warsuit BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474637 Share on other sites More sharing options...
Magos Takatus Posted February 9, 2020 Share Posted February 9, 2020 TiTHI finally got my friend to decide on a colour for the Skaven Blood Bowl team I'm making for him and got some work done on my Primaris Chaplain. I'm starting to love the model, I just wish my ability to blend highlight black was a lot smoother. Edge highlighting seems okay but more advanced attempts are of limited success. BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474787 Share on other sites More sharing options...
thewarriorhunter Posted February 10, 2020 Share Posted February 10, 2020 TITH I helped my son apply static grass to his bases. What an upgrade! Viridia, McElMcNinja, BitsHammer and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5474822 Share on other sites More sharing options...
painting.for.my.sanity Posted February 10, 2020 Share Posted February 10, 2020 TITH I went bits box diving and found the parts to put together a Stalker Bolt Rifle Lieutenant. This means I now have all three Tacticus-armoured Lieutenant weapon options, plus a Gravchute Phobos one. BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5475020 Share on other sites More sharing options...
Zephaniah Adriyen Posted February 10, 2020 Share Posted February 10, 2020 TITH, I got my full Raven Guard army caught up on painting again - note, the models that need painted were all acquired three days ago or less. I need a new pot of Agrellan Earth for basing, but I've got all of them up to the stage I'd apply the Agrellan Earth at (model fully painted, base rimmed and undercoated). BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5475182 Share on other sites More sharing options...
painting.for.my.sanity Posted February 12, 2020 Share Posted February 12, 2020 (edited) The Predator is finished (afore-mentioned SBR Lieutenant also in shot). EDIT: more bits box diving, and another Lieutenant for 12 Months of Hobby. Edited February 12, 2020 by SufficientAnonymity treadhead, Viridia, Zephaniah Adriyen and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5475917 Share on other sites More sharing options...
BitsHammer Posted February 13, 2020 Share Posted February 13, 2020 So I found out that my FLGS is doing a Kill Team campaign in the near future and I've got some leanings towards getting some Krieg models together to run as a Kill Team. And in other news, the camera came in and I gave it a test run: And a close up on my favorite detail on this model: I'm honestly really happy with the image quality. This will work great for what I want to use it for. painting.for.my.sanity 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5476333 Share on other sites More sharing options...
Zephaniah Adriyen Posted February 13, 2020 Share Posted February 13, 2020 (edited) So I found out that my FLGS is doing a Kill Team campaign in the near future and I've got some leanings towards getting some Krieg models together to run as a Kill Team. And in other news, the camera came in and I gave it a test run: And a close up on my favorite detail on this model: I'm honestly really happy with the image quality. This will work great for what I want to use it for. I mean, I just love that model, pose, paint job, decal work and weathering, image quality be damned. What's that yellow recipe? TITH, I started the process of converting (in certain cases) and painting one member of each First Founding Chapter (sans Raven Guard, who I already have a number of models of and thus refuse to go out of my way to paint one of when I already have an army of them). I mixed my own Space Wolves grey color and used some spare bits from the Blood Claws box I had before I even actually started playing 40k. One headswap, repose and power pack swap on the Know No Fear Intercessor Sergeant later, I had an Intercessor Pack Leader. I took some inspiration from Duncan's Wolves tutorial and used a brown panel-edge wash (I think he used Agrax Earthshade, I used Seraphim Sepia) instead of an all-over wash of any kind, because I'm out of Nuln Oil and it looks good. I did two thin coats for the yellow (I don't have decals for him, but he's still wearing the colors of Ragnar's Great Company) and I also mixed up my own red hair color for him using an "until it looked right" mix of Khorne Red and Fire Dragon Bright. He's a pretty good model, and I'm excited to get on with the remaining models in the series. Also, a question - do I do a Death Company Intercessor for Blood Angels, to offer greater conversion opportunities, or do I do a basic Blood Angel? Edited February 13, 2020 by Zephaniah Adriyen Viridia and BitsHammer 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5476385 Share on other sites More sharing options...
BitsHammer Posted February 13, 2020 Share Posted February 13, 2020 (edited) So I found out that my FLGS is doing a Kill Team campaign in the near future and I've got some leanings towards getting some Krieg models together to run as a Kill Team. And in other news, the camera came in and I gave it a test run: And a close up on my favorite detail on this model: I'm honestly really happy with the image quality. This will work great for what I want to use it for. I mean, I just love that model, pose, paint job, decal work and weathering, image quality be damned. What's that yellow recipe? TITH, I started the process of converting (in certain cases) and painting one member of each First Founding Chapter (sans Raven Guard, who I already have a number of models of and thus refuse to go out of my way to paint one of when I already have an army of them). I mixed my own Space Wolves grey color and used some spare bits from the Blood Claws box I had before I even actually started playing 40k. One headswap, repose and power pack swap on the Know No Fear Intercessor Sergeant later, I had an Intercessor Pack Leader. I took some inspiration from Duncan's Wolves tutorial and used a brown panel-edge wash (I think he used Agrax Earthshade, I used Seraphim Sepia) instead of an all-over wash of any kind, because I'm out of Nuln Oil and it looks good. I did two thin coats for the yellow (I don't have decals for him, but he's still wearing the colors of Ragnar's Great Company) and I also mixed up my own red hair color for him using an "until it looked right" mix of Khorne Red and Fire Dragon Bright. He's a pretty good model, and I'm excited to get on with the remaining models in the series. Also, a question - do I do a Death Company Intercessor for Blood Angels, to offer greater conversion opportunities, or do I do a basic Blood Angel? Thanks! And my yellow recipe at the time was Averland Sunset with Yriel Yellow with a bit of Flash Gitz for any really popping spots (like the helmet on the captain in my profile picture). Edited February 13, 2020 by Fulkes Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5476472 Share on other sites More sharing options...
painting.for.my.sanity Posted February 13, 2020 Share Posted February 13, 2020 TITH I had (and lost) my first game since 4th edition. I played my local GW's manager (thank you Brett at Bury St Edmunds - you're awesome). We kept it pretty straightforward as this is my first game since 4th, so DoW deployment, annihilation of your opponent the only objective, single battalion, 1000pts each. I don't have F&F, so I know this is far from an ideal build, but I wanted to get to grips with the basics and see how things had changed. I brought: Primaris Chaplain (warlord) with Benediction of Fury, Imperium's Sword and Mantra of Strength Primaris Lieutenant with Stalker BR 6 Intercessors 6 Intercessors 10 Veteran Intercessors with Auto BRs, Power Fist on the sergeant Invictor with Incendium Cannon Primaris Ancient Predator with 4 Las Cannons Whirlwhind They had a Great Unclean One, Typhus, Malignant Plaguecaster, Lord of Contagion, Foetid Bloat Drone, 7 Plague Marines and lots of Poxwalkers. I set up a castle with my tanks and Lt, screened out the front with Intercessors, set up a blob of Veterans/Chaplain and Ancient, and deployed the Invictor right up in my opponent's face. I got first turn, they failed to seize. Shooting was lame. The Whirlwind did practically nothing, even firing twice for 2CP, and the Predator chipped a couple of wounds off the GUO. At this point, I thought " it" and charged the GUO with my Invictor. It missed almost everything, then got killed in the return attacks. I was pretty worried, and then rolled a six on the explosion, and then kept rolling high for mortal wounds. 6 Plague Marines dead. Most of the poxwalkers gone. Typhus was left on a wound, and the MP and LoC on two each. I got a bit happier at this point. I can't remember exactly what order things happened in during the middle of the game. Basically though, the GUO and his remaining characters ended up in combat with my Veteran Intercessors, and killed a lot of them, but not before the Ancient allowed most of them to fight before dying. Little bits of chip damage to the GUO here and there, the death of his remaining characters bar the LoC. I finally got a decent block of damage on the GUO when my Chaplain actually got his litany to work - strength eight four damage hitting on 2+? Yes please. My predator fried the FBD. Late game I learned the value of screening the hard way when my two tanks got flanked and flattened in combat by the GUO and LoC... right after which I worked out how I could have blocked them with my last Intercessor squad and got an extra round of shooting in with at least the Predator. Oops. Overall, a lot of fun, and I feel getting nearly tabled by a rampaging Great Unclean One and nearly-dead Lord of Contagion, after killing everything else of your opponent's on the table isn't too bad a showing for your first game in four editions. BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5476547 Share on other sites More sharing options...
painting.for.my.sanity Posted February 15, 2020 Share Posted February 15, 2020 TITH I painted the best Lieutenant I've ever done... thewarriorhunter and Axineton 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5477418 Share on other sites More sharing options...
Axineton Posted February 15, 2020 Share Posted February 15, 2020 TITH I spent more money on GSC. Picked up a start collecting box, a Broodcoven box and the Atalan Jackels box. A small army is beginning to form. painting.for.my.sanity 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5477420 Share on other sites More sharing options...
Magos Takatus Posted February 15, 2020 Share Posted February 15, 2020 YiTHI finished painting my Primaris Chaplain (pics soon!). TiTHI received the glass display case... which arrived utterly destroyed. Now I can expect a replacement around March. On the plus side, the customer service person I spoke to was great and made my life a lot easier so I didn't have to return the small pile of glassy gravel back to the returns department. Now I just have to hope the second delivery isn't handled by Varag Ghoul Chewer. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5477518 Share on other sites More sharing options...
Zephaniah Adriyen Posted February 16, 2020 Share Posted February 16, 2020 small pile of glassy gravel Basing material maybe? Magos Takatus 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5477649 Share on other sites More sharing options...
Magos Takatus Posted February 16, 2020 Share Posted February 16, 2020 small pile of glassy gravel Basing material maybe? That's creative. I might just collect a few pieces. As promised, I've got some pictures of my Chaplain. Sadly I managed to destroy my tripod phone today so the pictures are in shakey-cam mode. For some reason the camera makes it look like he has giant comedy eyebrows. Here's a Youtube video that might show stuff I've missed in the above pictures. https://www.youtube.com/watch?v=g3f2ahFwhik I don't have my chapter icon sorted yet and I haven't filled in the scroll on his shoulder but apart from that and some varnish he's done(I think). Zephaniah Adriyen 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5477761 Share on other sites More sharing options...
treadhead Posted February 16, 2020 Share Posted February 16, 2020 (edited) TITHI Helped my niece paint her second chaos marine, we started with the word bearers colours, but now he looks like he just ran headlong, firing wildly through a paint factory so many colours if she asks her mum for models like my nephew did my sis is gonna kill me rofl Edited February 16, 2020 by treadhead Axineton 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5477847 Share on other sites More sharing options...
Karhedron Posted February 16, 2020 Share Posted February 16, 2020 Here is Jain Zar that I picked up split from the box set before Christmas and finally got around to finishing off. Magos Takatus, Zephaniah Adriyen and Dosjetka 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5477908 Share on other sites More sharing options...
Viridia Posted February 16, 2020 Share Posted February 16, 2020 Been digging around and found some of the Berserkers I'd converted but thought I'd lost. Also did some toting up and realised that when I assemble a classic 'stick it in a sock against fish of fury players' dread and remove the paint off my very first Ultramarines dreadnought I'm going to have four for my 40k army, not including my Redemptor. Starting to feel like I should just roll them as 30k Iron Hands rather than 40k homebrew Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5478001 Share on other sites More sharing options...
thewarriorhunter Posted February 17, 2020 Share Posted February 17, 2020 TITH I finished my first commission and checked off one of my 2020 hobby goals (complete a commission): Zephaniah Adriyen 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5478066 Share on other sites More sharing options...
painting.for.my.sanity Posted February 17, 2020 Share Posted February 17, 2020 TITH I ordered the parts for my Primaris-scale Grimaldus conversion. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/359/#findComment-5478207 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now