Wraithwing Posted December 7, 2015 Author Share Posted December 7, 2015 I really like what you've done with the shield, turning it into the ravening maw. Also the subtle tinge of blue in your grey armor is excellent. Perfect, subtle. Mechanically, you've done a very goo job, however I have one criticism that I apologize for: I know you matched the colours with the same ones GW's heay metal team did for for Harald, but their choice to do teal for the troll skin causes it to clashes with the other colours in the worst way. my advice is to match the cape with the colour of the frost axe (build up from blue to white). it'll will tie both of them into the model better without the clashing. I can see where you are coming from Wispy, and I'm happy to take on all constructive criticism! The thing is, I quite like the teal colour of the trollskin, and quite like it that way. I think the armour has enough blue in it for the clash to not be as great as it could be. Each to their own though, and thanks for the kind comments! Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4246104 Share on other sites More sharing options...
Wraithwing Posted December 13, 2015 Author Share Posted December 13, 2015 I think we can finally call Harald finished: This is the first time I've used snow on bases, using bicarbonate of soda, pva and white paint. I might do another layer, for a thicker covering. Next up on the painting table, Grey Hunters! Cheers, WW Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4251314 Share on other sites More sharing options...
Ambrosius_ Posted December 14, 2015 Share Posted December 14, 2015 Looking good! As a guy that relies heavily on washes, I admire all the patient layering that's apparent in this paint job. Very crisp! Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4251394 Share on other sites More sharing options...
beefeb Posted December 15, 2015 Share Posted December 15, 2015 looking great there. Im looking forward to seeing what you do with the GH next. Im progressing slowly with mine....i find the Russ Grey very transparent and really needs a good two or three coats to even cover up any agrax earthshade that overspills the target area.....do you have similar experience using this paint....its the first time ive used the colour and yours seems very nice smooth finish. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4253035 Share on other sites More sharing options...
postal105 Posted December 16, 2015 Share Posted December 16, 2015 looks good man Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4253454 Share on other sites More sharing options...
Wraithwing Posted December 16, 2015 Author Share Posted December 16, 2015 Time for a few more WIP shots, to keep the thread rolling. First up, WIP shots of the start of two packs of Grey Hunters: Blood Claws: Void Claws! And finally, my Wolf Priest: Hopefully, I can get the first half of the melta pack of GHs painted this coming weekend (have my Grandfathers funeral on Friday, so will serve as a good distraction). Then I plan to pick up a Command Squad box and use the legs and torso's to add some variety to the remaining halves of the packs that need building, as well as a building a GH with Wolf Standard. Cheers, WW Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4254092 Share on other sites More sharing options...
beefeb Posted December 16, 2015 Share Posted December 16, 2015 Nice....good stage by stage images, really enjoyinh them. Ive ditched the blu grey finish and going for the actual grey finish on armour panels....i just couldnt get a decent finish on the Russ grey....my own limitations. The WP....Gamesday mini yes? Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4254098 Share on other sites More sharing options...
Wraithwing Posted December 16, 2015 Author Share Posted December 16, 2015 Nice....good stage by stage images, really enjoyinh them. Ive ditched the blu grey finish and going for the actual grey finish on armour panels....i just couldnt get a decent finish on the Russ grey....my own limitations. The WP....Gamesday mini yes? That's right, Games Day Wolf Priest. Took me a while to track one down at a reasonable price. Bought one a few weeks back, and turned out to be a resin recast. A very good recast, but a recast nonetheless. As such, I sourced another metal Wolf Priest (I'm OCD like that). With regards to your Russ Grey, how are you painting it? What colour are you using as a base? Straight over black, or do you base in The Fang first? Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4254137 Share on other sites More sharing options...
Rune_Priest_Rhapsody Posted December 16, 2015 Share Posted December 16, 2015 I too like to combine the contents of a standard marine kit with a SW one, it certainly gives you a better visual range of models for your army. Harald looks great!! beefeb, yes it is. End of Line Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4254139 Share on other sites More sharing options...
Wraithwing Posted December 16, 2015 Author Share Posted December 16, 2015 Forgot to mention, the Void Claws all have magentised arms as well. Didn't want to limit myself to just Void Claws. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4254142 Share on other sites More sharing options...
beefeb Posted December 16, 2015 Share Posted December 16, 2015 Nice....good stage by stage images, really enjoyinh them. Ive ditched the blu grey finish and going for the actual grey finish on armour panels....i just couldnt get a decent finish on the Russ grey....my own limitations. The WP....Gamesday mini yes? That's right, Games Day Wolf Priest. Took me a while to track one down at a reasonable price. Bought one a few weeks back, and turned out to be a resin recast. A very good recast, but a recast nonetheless. As such, I sourced another metal Wolf Priest (I'm OCD like that). With regards to your Russ Grey, how are you painting it? What colour are you using as a base? Straight over black, or do you base in The Fang first? I did it exactly as per the GW guide. Then i tried it with Halfords Grey Plastic Primer....both ways it just didnt loo kgood for me. Im a fairly decent painter....not to Golden Daemon or anything like that but i have been complimented on my paintjobs and won a couple of GW Store contess over the years so im not a novice. Its perhaps more a criticism of the light tones of the pain n the flesh so to speak. I perhaps have a stereotype darker viking feel im looking for so its possibly down to that pre conceived notion. By the way, i too am very ocd about minis.....when GW started the finecast monstrosities i bought up a lot of the metal sculpts that i had a good idea that i would want to try out sometime. I grabbed the rune priest brandishing an axe, and the entirety of the BA character lineup. I hate finecast resin, its awful. If i see a model, no matter how good it is, if its finecast i move on. I dont have issues with other resins...FW and other manufacturers stuff has been fine, but the finecast stuff i have found to be dross. Thankfully all the new stuff is plastics. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4254296 Share on other sites More sharing options...
Wraithwing Posted December 17, 2015 Author Share Posted December 17, 2015 The later batches of finecast were actually ok. I've only worked with a couple of minis in finecast, but both have been ok. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4254721 Share on other sites More sharing options...
beefeb Posted December 17, 2015 Share Posted December 17, 2015 The later batches of finecast were actually ok. I've only worked with a couple of minis in finecast, but both have been ok. I must have been particularly unlucky then, every single one i got had at least 1 significant and very visible flaw in them. I have for example a box of Ork Kommandos waiting to be assembled and painted. These are now a couple of years old and i havent got round to them other than getting them out of the shrink wrap to gauge the effort required to get them up to scratch....very disheartening assessment indeed i have to say. I also found that no matter what, any finecast blades are inevitably flexible or bent. I so much prefer metal....that said, as i mentioned earlier the current run of plastic kits are simply beautiful,,,,i got the new BA Chaplain recently released and the detail and finish are superb. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4255155 Share on other sites More sharing options...
Wraithwing Posted December 22, 2015 Author Share Posted December 22, 2015 Time for a few more WIP shots, just to keep the thread rolling. First up, Fenrisian Wolves. These will be expanded into a pack of 10. I picked these up for free from a chap giving them away on Facebook. They were battered and badly painted, but after a few minutes in acetone free nail polish remover, I think they've come up OK! First time I've seen this kit in the flesh, and I'm pleasantly surprised by them, really nice miniatures. Next up, the second half of my Blood Claw Pack: Again, I've used running legs for these guys, and love the sense of movement it gives them. These are from the new Assault Squad kit, so they are slightly more dynamic than the older Assault Marine legs. Finally, I've done a Wolf Standard for my Plasma Grey Hunter Pack: I'm going to have a go at freehanding Harald's banner from the Companies of Fenris painting guide. This one: I haven't glued the banner, for ease of painting. I also wanted to use the cool holstered Bolter from the TWC kit, and think it works well here. I'm hoping to get the remaining four Grey Hunters from the Plasma Pack built today. As always, C&C is welcome. Cheers, WW Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4258591 Share on other sites More sharing options...
Wraithwing Posted December 22, 2015 Author Share Posted December 22, 2015 Five more Grey Hunters built: With the rest of the Pack: Plus, a sneaky group shot of what I've got so far: Still to build: Five more Grey Hunters, for the Melta Pack Drop Pod for the Melta Pack Three Thunderwolf Cavalry Still to buy: Two more Drop Pods Venerable Dreadnought Three more Thunderwolf Cavalry Stormwolf I've also got enough PA bodies for a unit of Skyclaws and Long Fangs, but am in two minds about them. Cheers, WW Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4258837 Share on other sites More sharing options...
beefeb Posted December 22, 2015 Share Posted December 22, 2015 Really nice little army building up there fella. I cant wait to see how you get on with the standard, freehanding those things is a nightmare, Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4258955 Share on other sites More sharing options...
Wraithwing Posted December 24, 2015 Author Share Posted December 24, 2015 Time for a sneaky WIP, this time with PAINT! Hoping to get these guys done tomorrow: Cheers, WW Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4260259 Share on other sites More sharing options...
Wraithwing Posted December 30, 2015 Author Share Posted December 30, 2015 Had a play with my light box, and took some better photos of finished Harald. I need better lighting, but I'm pretty happy with him how he stands now: C&C, as always, is welcome. Cheers, WW Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264428 Share on other sites More sharing options...
BlodVargarna Posted December 30, 2015 Share Posted December 30, 2015 Classic look. I love it. What is the snow? Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264503 Share on other sites More sharing options...
Wraithwing Posted December 30, 2015 Author Share Posted December 30, 2015 Classic look. I love it. What is the snow? It's Bicarbonate of Soda mixed with PVA glue and white paint. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264553 Share on other sites More sharing options...
Wraithwing Posted December 30, 2015 Author Share Posted December 30, 2015 First half of my Melta Grey Hunters Pack done: I was really pleased that I managed to pick up 40 Harald Deathwolf Great Company symbol transfers for power armour, and 10 for terminator armour from a guy in a FB trading group. Also the first time I've used Microset and Microsol, so pretty happy with how these have come out: Just the grass tufts and snow on the bases left to do, but want to hit them with a coat of varnish before I do that. I've also used all of the same pack marking shoulder pads. I quite like the uniformity it gives. I'll be doing the same for my Blood Claws: The Wolf Guard Pack Leader's Power Fist is also magnetised, for when I need to shave points off the list: Also made a start to the Fenrisian Wolves: Pleased to get some painted units done, as it keeps the old momentum going! C&C is, as always, welcome. Cheers, WW Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264585 Share on other sites More sharing options...
BlodVargarna Posted December 31, 2015 Share Posted December 31, 2015 Great look! One mild criticism is that the the bottom of the transfer looks awkward ending and then the red showing under it. I think it might look more polished if you extend the wolf head with paint to the shoulder rim. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264625 Share on other sites More sharing options...
Rune_Priest_Rhapsody Posted December 31, 2015 Share Posted December 31, 2015 I also like to use the same shoulderpads on my models, but mine aren't painted... It looks really nice, WW. Great work. Your metallics are also really nice, very smooth looking. End of Line Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264684 Share on other sites More sharing options...
Wraithwing Posted December 31, 2015 Author Share Posted December 31, 2015 Great look! One mild criticism is that the the bottom of the transfer looks awkward ending and then the red showing under it. I think it might look more polished if you extend the wolf head with paint to the shoulder rim. Thanks BlodVargarna. Yeah, I noticed that more so after they had dried. There is a thin strip of transfer paper under the wolf head, so may trim that away for the next batch. I also like to use the same shoulderpads on my models, but mine aren't painted... It looks really nice, WW. Great work. Your metallics are also really nice, very smooth looking. End of Line Thanks RPR, I appreciate the positive comments! Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264808 Share on other sites More sharing options...
BlodVargarna Posted December 31, 2015 Share Posted December 31, 2015 What if put some paint on the bottom of the transfer, covering that tiny bit of red? But only a MINOR quibble. I am really liking your paint style and modelling. The pack marking is very cool. Overall your style is crisp and classic. Link to comment https://bolterandchainsword.com/topic/316603-wraithwing%E2%80%99s-deathwolves-a-space-wolves-painting-blog/page/2/#findComment-4264987 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.