Slave to Darkness Posted February 11, 2021 Author Share Posted February 11, 2021 I am trynna get a unit of each type available included, so there will be one armed with assault weapons, one with lasguns and one with bolters. Heres a pic of one with a lasgun. The lasguns are a bit on the small side, thats fine but boltguns will look massive on these, unless I try find some RTB01 bolters from somewhere. Ill figure something out anyway. I have settled on the green and red, now I have that issue out the way I have now got to figure out what design I want to use for my Brotherhood banner. Kierdale, templargdt, Galloway and 5 others 8 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5666502 Share on other sites More sharing options...
Ryltar Thamior Posted February 12, 2021 Share Posted February 12, 2021 Would Sisters of Silence boltguns be an alternative and smaller option ? LameBeard 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5666555 Share on other sites More sharing options...
Slave to Darkness Posted February 12, 2021 Author Share Posted February 12, 2021 Would Sisters of Silence boltguns be an alternative and smaller option ? I did not think of that. Tbh I keep forgetting they are a thing because I never see them out in the wild. Ryltar Thamior 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5666560 Share on other sites More sharing options...
Slave to Darkness Posted February 12, 2021 Author Share Posted February 12, 2021 The red and green makes them look like holly bushes, now I have seen it I cant unsee it. Still, I have made up my mind and theres no going back now. I have got the greens, reds and silver down on the Warlord and two Hearthguard so far, just need to do the flesh, gloves, belts and pouches etc and the first 3 minis are finished. LameBeard 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5666871 Share on other sites More sharing options...
space wolf Posted February 12, 2021 Share Posted February 12, 2021 have you considered making the normal las guns into carbines. just cut the barrels off of the normal lasguns, then just glue the "compensator" lens on the end where you cut the barrel off. I like to hollow out that little bit on the top of the upper receiver then add a bit of plasticard over it. so it looks like a carry handle. Almost like a German G36 rifle. ....hope all that made sense. Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5666905 Share on other sites More sharing options...
Slave to Darkness Posted February 13, 2021 Author Share Posted February 13, 2021 Yeah that made sense. Tbh I have not thought about the weapons since I thought the colour scheme makes them look like christmas decorations. May as well just go with it and add snow to the bases as well. Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5666956 Share on other sites More sharing options...
Slave to Darkness Posted February 14, 2021 Author Share Posted February 14, 2021 Turns out the normal Marine bolters dont look too bad on the Einherjar. I got three bolter boys done and converted a heavy stubber from the body of the Einherjar flamer and the barrel from the WGA WW1 German machine gun. Also built and got the basecoats down on the Khorne Squat lord and started on the first Khornate Hearthguard. Ill add pictures later when I get in. LameBeard 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5667296 Share on other sites More sharing options...
space wolf Posted February 17, 2021 Share Posted February 17, 2021 Nice. Love to see them! Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668436 Share on other sites More sharing options...
Syrakul Posted February 17, 2021 Share Posted February 17, 2021 The red and green makes them look like holly bushes, now I have seen it I cant unsee it. Still, I have made up my mind and theres no going back now. I have got the greens, reds and silver down on the Warlord and two Hearthguard so far, just need to do the flesh, gloves, belts and pouches etc and the first 3 minis are finished. Alot of good paint schemes are wasted by christmas comparisons for me (red gold, red green etc.) best bet is remind yourself about other real world examples (like type in red green insignia in google images) Also pictures please! LameBeard 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668450 Share on other sites More sharing options...
Slave to Darkness Posted February 17, 2021 Author Share Posted February 17, 2021 Yeah I keep meaning to post pictures but when I remember the lighting is crap and they never work out. Ill have another go later when I charge my phone. I got the bolter squad built, the current bolters did seem a tad too big at first until I remembered the size of the weapons GW gives things these days, and slightly out of scale weapons does remind me of my 1st ed days and the purpose of this army is to try and bring back some of the shine of the hobby I once had so meh, it may look goofy but I have a squad of Squats with bolters, and they kill things good. :D In other news I did come across some pretty good bikes and Eggbots (both normal and Chaos). Cant remember where I saw the Eggbots so Ill have to go looking again but these are the bikes I have my eye on. https://shop.ramshacklegames.co.uk/50-pick-and-mix-dwarf-bikers I may purchase a singular model this week just to see how they look and scale with the Einherjar, and they are priced low enough that I can run a minimum sized Squat biker army without spending the rest of my life eating trash (again like the foot Squats this is a Lord, 4 Hearthguard and 3 units of 8 bikers). Dwango, Bryan Blaire, Syrakul and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668457 Share on other sites More sharing options...
Slave to Darkness Posted February 17, 2021 Author Share Posted February 17, 2021 Warlord and Hearthguard. Bolter squad. Close up to see how the bolter looks on such a smol dude. Engineer, first two chaps from my assault squad and a battered old Rhino. Khorne Warlord and the first of the Hearthguard. LameBeard, Dwango, Kierdale and 3 others 6 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668485 Share on other sites More sharing options...
space wolf Posted February 18, 2021 Share Posted February 18, 2021 I like these! Well done! Slave to Darkness 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668703 Share on other sites More sharing options...
Syrakul Posted February 18, 2021 Share Posted February 18, 2021 Good lord that bolter is huge, i agree you are probably going to want to downsize to SoS or battle sister bolters, or older-gen SM bolters, which have the styling you want anyways. Hard to see how the CC weapons stack up, but i like the old chaos warrior bits on the khornate warlord. Slave to Darkness 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668774 Share on other sites More sharing options...
ThePenitentOne Posted February 18, 2021 Share Posted February 18, 2021 Hope those bikes are the right scale for you- they look great! Slave to Darkness 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668862 Share on other sites More sharing options...
Chaeron Posted February 18, 2021 Share Posted February 18, 2021 Naturally, I was hoping for countless original monopose plastics when I opened the thread... but this is exciting! Will be following with interest! Slave to Darkness 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668872 Share on other sites More sharing options...
Slave to Darkness Posted February 18, 2021 Author Share Posted February 18, 2021 Good lord that bolter is huge, i agree you are probably going to want to downsize to SoS or battle sister bolters, or older-gen SM bolters, which have the styling you want anyways. Hard to see how the CC weapons stack up, but i like the old chaos warrior bits on the khornate warlord. The chainswords are Cadian sgt ones, still look kinda long but hey, this is Warhammer. If I start questioning why a Dwarf cant carry a huge ass sword then I have to question a lot more about this game :lol: The bolt pistols are a bit shorter than the lasguns the Einherjar come with. I have found a few more bits to bling up the Khorne Lord, and I have even found the Hero Quest Gargoyle head that I wanna try use as well, I may use it as some form of brass decoration on the banner pole. Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668874 Share on other sites More sharing options...
Slave to Darkness Posted February 18, 2021 Author Share Posted February 18, 2021 Naturally, I was hoping for countless original monopose plastics when I opened the thread... but this is exciting! Will be following with interest! If I had the cash I would be all over the old Squats, and Orks. They are the only plastic kits I never got as a kid. I am eyeing up some sculpts that look like the old plastics, I think they were sculpted by our very own Inso, I may do a second Brotherhood using just his stuff for 2nd ed. 1st ed Squats were able to carry bolters but their heavy weapons were restricted to all heavy bolters and one other heavy weapon, 2nd ed Squats cant use bolters but were able to mix heavies. Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668881 Share on other sites More sharing options...
Slave to Darkness Posted February 19, 2021 Author Share Posted February 19, 2021 (edited) Hope those bikes are the right scale for you- they look great! Just took the plunge and ordered these. The biker is to see the scale compared to the WGA Einherjar, the ninja looking Gandalf will be on foot. If they scale well with my army and the casts are good Ill be ordering a squad next time I get paid, I usually spend more than that on takeaway so Ill ditch the pizza for once and get something to show for my money other than high cholesterol and a dodgy stomach. Found the Exo Armour Eggbot minis again. https://www.wereweevilminiatures.com/shop Just check out this beaut!!! They have Eggbots for all the Chaos Gods and Imperial ones, the bikers look a bit cheesy (seen better looking bikes in kinder surprise eggs ngl) but a lot of the stuff I am really vibing with. Edited February 19, 2021 by Slave to Darkness Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5668913 Share on other sites More sharing options...
Slave to Darkness Posted February 19, 2021 Author Share Posted February 19, 2021 After a good old think I have decided to switch Gods for the Stealer Cult from Slaanesh to Nurgle. I already have Slaaneshi Marines and Daemons for 40k and a Gang for Necromunda and fancied a change, and because I have a ton of bits that need using up. Another Idea I'm contemplating as well. Kierdale 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5669203 Share on other sites More sharing options...
ThePenitentOne Posted February 19, 2021 Share Posted February 19, 2021 One of your bikes has an Ancestor! That is freakin cool! I don't remember all the squat rules, but Ancestors were my favourite part of the list- ESPECIALLY the ones on Trikes! They are why I want GW to revisit Squats- I would LOVE to Crusade until one of my squad leaders grew to Ancestor status; I'd love to just kit one of those out with Warlord traits and Relics and upgrade strats- so many possibilities... Looking so forward to seeing more. Slave to Darkness 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5669259 Share on other sites More sharing options...
Slave to Darkness Posted February 20, 2021 Author Share Posted February 20, 2021 Just started the leader of the 'Assault' squad, loosely based on this handsome fella. Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5669276 Share on other sites More sharing options...
Slave to Darkness Posted February 22, 2021 Author Share Posted February 22, 2021 Bolter squad. Assault suad. Heavy support squad. Group shot. Deviated from my initial list a bit due to what stuff I had laying about. Thought I needed some bigger guns so made some heavy weapon guys instead of the lasgun squad, I still need to add two more Squats to that unit but that will have to wait until I buy another box of Einherjar. LameBeard 1 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5669894 Share on other sites More sharing options...
Slave to Darkness Posted February 24, 2021 Author Share Posted February 24, 2021 Finished the Warlord, Hearthguard and Khorne Lord. Pictures are a bit dark, lightings not very good here. Doghouse and LameBeard 2 Back to top Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5670770 Share on other sites More sharing options...
Wulf Vengis Posted February 25, 2021 Share Posted February 25, 2021 Love it! Keep it comin'. Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5671102 Share on other sites More sharing options...
Slave to Darkness Posted February 25, 2021 Author Share Posted February 25, 2021 Next week I am going to order a couple more Einherjar sprues, I need two more Squats for the heavy weapon squad, and I need 4 crew for the Rapiers/Tarantulas that I will be making from the Les Grognard hvy wpn sprues. May take the plunge and get a squad of bikes as well. :) Then Ill have some decent firepower in my backline and Ill squeeze some meltas into the bikes for some cheeky anti tank firepower as well. As most of my 1st ed stuff will end up as batreps here, what would people wanna see first, Squats vs Orks or Squats vs Eldar? Link to comment https://bolterandchainsword.com/topic/368858-30-years-in-the-hobby-slave-does-1st-ed-again/page/2/#findComment-5671111 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now