Vykes Posted July 19, 2019 Share Posted July 19, 2019 I'm always happy to see and hear about Titans, WarriorHunter. Even Teenie Titans. (still keep thinking about getting involved in Titanicus but it's hard to find a scene and it's a big enough jump). As for me, TITH I found out that somehow I've accumulated 50 genestealer cultists that I never put together. So I decided to assemble ten, sans heads, just to see if I liked them enough to spring for a new project. Turns out Genecultists are a ton of fun. So I ordered a bunch of Anvil Industries void trooper heads and some extra hand gestures and bionics, gonna be making myself a void-clade allied force for my Sons of Horus. I also got stuck and then maaaaybe figured out what to do with 3 scimitar jetbikes and 1 javelin that were teetering between Sons of Horus, Luna Wolves, and Alpha Legion. Luna Wolves are looking promising as I can use them as loyalists and actually use scimitars as attack bikes and javelin as, well, a javelin. BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5349563 Share on other sites More sharing options...
BitsHammer Posted July 19, 2019 Share Posted July 19, 2019 (edited) TITH (starting yesterday and going to the time of this post) I've picked up tge first 23 Vallejo paints for my Imperial Fists (I honestly may need more, I honestly don't know yet), and I built the Infiltrators, Captain, Librarian and Lieutenant from the Shadowspear box. I admitidly didn't make life easy for myself by attaching all the arms, but even if I paint each model one at a time I don't want to fight to pair up arms later and would rather make painting a couple sections a little harder on myself. Whenever I come out of my coma tomorrow I'm going to finish the last six models and start using some old Primaris kit stuff to start doing color tests. The plan right now is to do a warm yellos by undershading the shadows of the model in red instead of brown, but I may switch to something like an ochre if red too strong on it's own. If the red works it'll give the shadows a warm orange look instead of a duller yellow-brown. I've also startes to plan this project and to put it simply: there are going to be a lot of Primaris in my future. By the time I finish I'm going to have done a lot of painting with NMM and weathering (as well as skin and yellow). How many Primaris exactly? Somewhere around at least a company minimum, but more likely to push towards a full chapter since I want to put an insane number of Marines on the table for Apoc. Edited July 19, 2019 by Fulkes Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5349620 Share on other sites More sharing options...
thewarriorhunter Posted July 19, 2019 Share Posted July 19, 2019 I'm always happy to see and hear about Titans, WarriorHunter. Even Teenie Titans. (still keep thinking about getting involved in Titanicus but it's hard to find a scene and it's a big enough jump). It is a big jump. There's only a few people playing around me, but I like them and it's a really fun game. It also gives me a break from just painting marines which I like. TITH (starting yesterday and going to the time of this post) I've picked up tge first 23 Vallejo paints for my Imperial Fists (I honestly may need more, I honestly don't know yet). I love Vallejo paints. I've used them almost exclusively since I got into the hobby and really like them. BitsHammer and Vykes 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5349736 Share on other sites More sharing options...
Zephaniah Adriyen Posted July 19, 2019 Share Posted July 19, 2019 Sorcery is learned, it is not tied to the Chaos Gods - with the exception of the natural head-explosions customary to Khornate psykers. - Kazem Eftekhar I could stand to pick up some Titanicus. That'd let me test Titan and Knight paint jobs, y'know? Last night, after midnight, so legally TITH, I finished up the first squad of the Wayward Sons of Asromiamun. BitsHammer and Vykes 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5349753 Share on other sites More sharing options...
El_Dicko Posted July 19, 2019 Share Posted July 19, 2019 So! TITH: Lost my first game of 40k in 18 years hahaha but it was so fun. Red Corsairs vs Ork Freebooters, 500 points for the an escalation league. Our warlords murdered each other and his one surviving model ran off the objective(pirate treasure). Didn’t think it would be this much fun. My opponent’s write up: “Dicks Red Corsairs and Davids Freebootaz clashed today in the first round of the league, fighting over a pile of loot in the middle of the desert. It was a very tight and enjoyable game with epic moments and legends being forged. You could almost hear the faint voices of pirates chanting in the distance... While the Boys were busy choppin up some Marines in the middle of the board, the Jumppack Chaos Lord rampaged through the Orks backline. He then smashed the Skull of the Warboss, only to be torn apart by his deadly klaw in the same instant. When the last Ork Nob saw his Boss dead, he swiftly grabbed the loot and ran for it, disappearing in the ruins to finally start his own Waaagh. Chaos (Red Corsairs) 1 : 3 Orks (Freebootaz) Game ended after 6 turns. Thanks to my amazing opponent and to Oliver (and others?) for organizing this league.” BitsHammer, Vykes and Panzer 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5349785 Share on other sites More sharing options...
Baron Sebas Posted July 20, 2019 Share Posted July 20, 2019 TITH i finally got some hobby time in and build (and magnetized) my 2nd vow. tomorrow ill start priming and doing the bases. BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5350040 Share on other sites More sharing options...
BitsHammer Posted July 21, 2019 Share Posted July 21, 2019 TITH I didn't get much painting done instead reveling in finally getting Fallout 3 to work on a Windows 7 machine with an Intel HD card. Basically it was an endevour worthy of Dorn himself. Hobby wise though I did work out details on how I'm organizing a very large Imperial Fists army project down to how I plan on doing their markings, company numbers and other details. I'm still experimenting with the paints but I have a set of Shadowspear Primaris I finished building a couple days ago. I won't be finishing them this week due to needing to order my first batch of transfers but I think the paint jobs up to thst point will get finished this week. Red_Shift 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5350608 Share on other sites More sharing options...
Zephaniah Adriyen Posted July 22, 2019 Share Posted July 22, 2019 TITH, I decided I wanted to make an Iyanden-but-even-deader Craftworld (FW Wraithseers, 99% models with the SPIRIT HOST keyword) in black-with-white-detail and a Wych-Cult in white-with-black-detail. Also finally picked up my ETL vow. BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5350664 Share on other sites More sharing options...
Viridia Posted July 22, 2019 Share Posted July 22, 2019 I may have made a thing; First time ever working on a truescale model and it definitely shows, but the threads for both Apologist's own Officia Monstrosa and Ryltar Thamior's Vox Stellarum have been huge influences on it for me. It's supposed to represent a mid-Heresy Son of Horus, and hopefully will be the first of, well, not many, but at least a few! Vykes and BitsHammer 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5351044 Share on other sites More sharing options...
Vykes Posted July 22, 2019 Share Posted July 22, 2019 Always happy to see truescale and even happier to see the glorious 16th, Viridia. Can't wait to see how ya do it! TITH, I finished up two long neglected Sons of Horus Catulan Reavers/ Black Legion Berserkers. And as I immediately went to the fridge to get a drink to celebrate the occasion, I snagged a plastic corner of the door rack and put an inch wide gash just below the knuckle that peeled all the skin up and over the joint. So, they've been properly consecrated to Khorne. BitsHammer and Viridia 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5351057 Share on other sites More sharing options...
Zephaniah Adriyen Posted July 22, 2019 Share Posted July 22, 2019 TITH, I ordered my first pack of Custodes. Shiny golden banana men! ShibeKing, RikuEru, BitsHammer and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5351063 Share on other sites More sharing options...
Magos Takatus Posted July 22, 2019 Share Posted July 22, 2019 Always happy to see truescale and even happier to see the glorious 16th, Viridia. Can't wait to see how ya do it! TITH, I finished up two long neglected Sons of Horus Catulan Reavers/ Black Legion Berserkers. And as I immediately went to the fridge to get a drink to celebrate the occasion, I snagged a plastic corner of the door rack and put an inch wide gash just below the knuckle that peeled all the skin up and over the joint. So, they've been properly consecrated to Khorne. Eep, just reading that made me wince. I hope it heals up quickly. Vykes and BitsHammer 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5351175 Share on other sites More sharing options...
BitsHammer Posted July 22, 2019 Share Posted July 22, 2019 More color tests. I'm not really like how thin Model Color Flat Yellow is for glazing over a darker yellow (Desert Yellow on the leg), but undershading with brown worked nicely. I need to test the yellow over a tan color for an idea I have, but I think I can do a decent zenithal shade with brown for a good effect. Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5351196 Share on other sites More sharing options...
Vykes Posted July 23, 2019 Share Posted July 23, 2019 (edited) Thanks Magos Takatus, as long as I'm not blessed by Nurgle I'll probably be fine. I hate Nurgle in every way. Well, despite the blooding and depite the way uncomfortable temperature swing of like 10C to 30+C, TITH I did most of my ETL Luna Wolf drop-naughts. Just got one more layer of rust to go on the base and quadruple varnish the top of the dread where the magnets will attach with the cyclone havoc launchers. Well, got that done. I hate boxnauts, but they'll fit into a cheap 30K drop pod where I don't want to spend the points or money on the Contemptors and their 3 times as costly versions. Edited July 24, 2019 by Vykes BitsHammer and Kierdale 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5351807 Share on other sites More sharing options...
SickSix Posted July 24, 2019 Share Posted July 24, 2019 (edited) LNITH (I never remember to post before I go to bed) I pulled out some on sprue scouts and a Land Speeder Storm to try and sell. I also continued decal work on my Gideon tanks. Unfortunately I have to pause them for over a month as my German tank decals will arrive during my 3 week camping trip with the Army lol. But they are looking better with the decals. Guess I will move back the infantry to finish them. Edited July 24, 2019 by SickSix BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5352221 Share on other sites More sharing options...
BitsHammer Posted July 24, 2019 Share Posted July 24, 2019 (edited) Y/TITH I've been working on this gentleman: Yellow was done by layering progressive mixes from Mahogany Brown (a warm brown) to Flat Yellow which gave the color a warm golden tone just running it over white lacked. I haven't been impressed by the Model Color flesh paints though so I'll be breaking out my GW pots to redo the head with. I really like the Grey Black though, and I used it for marking out everything I want to be steel or black later. Edited July 25, 2019 by Fulkes Magos Takatus and Vykes 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5352365 Share on other sites More sharing options...
Baron Sebas Posted July 25, 2019 Share Posted July 25, 2019 This week in the hobby i had a very slow week (weather is way to hot to do anything). the only thing i managed to produce for the ETL is i slapped some greenstuff on the bases. (and some greenstuff for my next objective marker) BitsHammer 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5352601 Share on other sites More sharing options...
Dreagher Posted July 25, 2019 Share Posted July 25, 2019 TITH I worked some more on my vulturax. BitsHammer and Vykes 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5352746 Share on other sites More sharing options...
Hfran Morkai Posted July 25, 2019 Share Posted July 25, 2019 R(ecently)itH I acquired a Caestus Assault Ram for my 30K VIth Legion. It's such a cool model and concept (very metal, literally slamming the thing into the enemy) that I had to have one. Shame they went oop. TitH I got a copy of The Lost and the Damned without paying scalper prices. I don't think I'm going to be so lucky with the next 6 given I work saturday mornings. RikuEru and BitsHammer 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5352795 Share on other sites More sharing options...
Zephaniah Adriyen Posted July 25, 2019 Share Posted July 25, 2019 My first box of Custodian Guard arrived today, and they are some of the best models I own now. Love 'em. I built one as a Shield-Captain, two with Guardian Spears, two with Sentinel Blades and Storm Shields. I intend to pick up another box of them, build four Guardian Spears and a Sentinel Blade, so I have three full squads and a Shield-Captain. Then I'll be picking up a box of Wardens, build three Wardens and two Vexilla (using Vexillus parts from one or both Guardian boxes) and then that's pretty much that. I also intend to pick up a box of Allarus Terminators, a pack of the jetbikes, a Contemptor and a Land Raider later on. Then and only then will I pick up Trajann Valoris, as a capstone to my collection. And so begins the chronicle of the Shield-Company of the Azure Bastion. Enemies of the Imperium, beware. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5352918 Share on other sites More sharing options...
BitsHammer Posted July 25, 2019 Share Posted July 25, 2019 Darklined the armour with Agrax Earthshade, and knocked out an urban camo scheme to balance the yellow armour. Decided that if I ever want to make decent progress on this army I'm going to skip trying NMM and do TMM. That said, I am getting closer to finishing with the base colors and highlights until I xan come back and do the weathering and metals. I think I will do the Librarian next. Red_Shift 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5353029 Share on other sites More sharing options...
Vykes Posted July 26, 2019 Share Posted July 26, 2019 (edited) TITH I played a no Maelstrom Sudden Death game of 40K against Space Wolves/Raven Guard, and lost the objective game but wiped out the entire army. It was a ton of fun, especially using some of my old ooooold jungle terrain and newer mech terrain. I'm feeling super nostalgic for 3E. Garagehammer on a nice day with the doors open. Loooovely. Also got my Anvil heads in to make up some void-clade soldiers for 30K/40K, and put together the first 10 to see if they would work... Now, how to organize 50 of them. Edited July 26, 2019 by Vykes Stoic Raptor, Chaeron, BitsHammer and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5353578 Share on other sites More sharing options...
robofish7591 Posted July 27, 2019 Share Posted July 27, 2019 Just finished my model for the everchosen competition. This was my first time painting OSL and I am pretty happy with how it came out too! But now it is 1AM and I need to get some sleep! BitsHammer and Vykes 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5353649 Share on other sites More sharing options...
Chaeron Posted July 27, 2019 Share Posted July 27, 2019 Also got my Anvil heads in to make up some void-clade soldiers for 30K/40K, and put together the first 10 to see if they would work... Now, how to organize 50 of them. These are great Vykes! Are they the Gothic Void variety? Definitely work very effectively with those bodies. Vykes and BitsHammer 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5353686 Share on other sites More sharing options...
Baron Sebas Posted July 27, 2019 Share Posted July 27, 2019 TITH the weather finally cooled down a bit so i got some work in for my ETL vow and slapped some more greenstuff on the bases, everything is ready to be primed and painted (wich i will do sunday) Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/334/#findComment-5353807 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now