Search the Community
Showing results for tags 'Forgeworld'.
-
1192 downloads
By commission of Vel'cona. Seventh and final in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).- 1 review
-
- Mechanicus
- Mechanicum
-
(and 2 more)
Tagged with:
-
1994 downloads
By commission of Vel'cona. Sixth in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Grey, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible). -=-=-=-=-=-=-=-=-=-=-=-=- SPECIAL NOTE: To comply with B&C upload file size limits, the Triplex Phall sheet is sized for A6 paper instead of the usual A5. To facilitate printing multiples logo sheets per page, a blank dummy page is included in the file. To print to A5, set Pages to Print to Pages: 1,1. Set Page Sizing & Handling to Multiple, Pages Per Sheet: 2 (or, if printing to A4, set the Pages Per Sheet to 4). http://image.bolterandchainsword.com/uploads/gallery/album_10579/gallery_80588_10579_125561.jpg-
- Mechanicus
- Mechanicum
-
(and 2 more)
Tagged with:
-
- 1 review
-
- Mechanicus
- Mechanicum
-
(and 2 more)
Tagged with:
-
- 1 comment
-
- Mechanicus
- Mechanicum
-
(and 2 more)
Tagged with:
-
- 1 review
-
- mechanicus
- Mechanicum
-
(and 2 more)
Tagged with:
-
-
- MechanicusMechanicum
- Forgeworld
-
(and 1 more)
Tagged with:
-
From the album: Sin Eaters
-
- Black legion
- Sin eaters
- (and 6 more)
-
From the album: Sin Eaters
-
- Black legion
- Sin eaters
- (and 6 more)
-
Hi, I wasn't sure where to post this question. Sorry if it's in the wrong place. I ordered some Sons of Horus Cataphractii shoulder pads. I know it says ships within 180 days, but I was wondering, have any of you bought any Made To Order items from Forge World before and if you could tell me an average lead time for receiving your items? Thanks in advance!
- 9 replies
-
- Forgeworld
- Questions
-
(and 1 more)
Tagged with:
-
From the album: To Wield the Blade
-
- 30k
- Horus Heresy
-
(and 4 more)
Tagged with:
-
From the album: To Wield the Blade
-
- 30k
- Horus Heresy
-
(and 6 more)
Tagged with:
-
From the album: To Wield the Blade
-
- 30k
- Horus Heresy
-
(and 4 more)
Tagged with:
-
From the album: Jolemai's Blood Angels
REINFORCEMENTS HAVE ARRIVED!!-
- Jolemai
- Blood Angels
-
(and 1 more)
Tagged with:
-
From the album: Blood angel Vehicles
-
From the album: Blood angel Vehicles
-
From the album: The First Legion, sons of the Lion
THis Hydra was painted in a slightly different scheme to represent the unit sitting in a yard, unused, for a few years. Heavy rust powder was appied and fixed to this unit to give a heavily rusted apperance. The cannons and turret as well as the carriage are all magnetic but the platform was too heavy to stay up for long.-
- Adeptus Mechanicus
- Hydra
-
(and 3 more)
Tagged with:
-
From the album: The First Legion, sons of the Lion
THis Hydra was painted in a slightly different scheme to represent the unit sitting in a yard, unused, for a few years. Heavy rust powder was appied and fixed to this unit to give a heavily rusted apperance. The cannons and turret as well as the carriage are all magnetic but the platform was too heavy to stay up for long.-
- Adeptus Mechanicus
- Hydra
-
(and 3 more)
Tagged with:
-
From the album: The First Legion, sons of the Lion
This Hydra was painted to resemble a piece that had been under heavy sustained fire and is very fire blackened.-
- Adeptus Mechanicus
- Hydra
-
(and 3 more)
Tagged with:
-
From the album: The First Legion, sons of the Lion
This Hydra was painted to resemble a piece that had been under heavy sustained fire and is very fire blackened.-
- Adeptus Mechanicus
- Hydra
-
(and 3 more)
Tagged with:
-
From the album: The First Legion, sons of the Lion
This is a pre-finished pic of a pair of Hydras from Forgeworld that I got about 1999, and finished in 2013. I am using the Salt-and-Hairspray method for speed, as these were to go up on ebay. Base caot was black, sponged on three colors of rust, brown, tan and orange. Sprayed with hairspray and coated with corse salt grains. Red overcoat with yellow and black warning stripes. Fast pass with a toothbrush and hot water to remove salt and then light brush with rust powder and metallic details. They didn't go for as much as I wanted, only about 35/45$. Only one had a carriage, forgeworld was out of stock at the time.-
- Adeptus Mechanicus
- Hydra
-
(and 3 more)
Tagged with:
-
From the album: The First Legion, sons of the Lion
This is a pre-finished pic of a pair of Hydras from Forgeworld that I got about 1999, and finished in 2013. I am using the Salt-and-Hairspray method for speed, as these were to go up on ebay. Base caot was black, sponged on three colors of rust, brown, tan and orange. Sprayed with hairspray and coated with corse salt grains. Red overcoat with yellow and black warning stripes. Fast pass with a toothbrush and hot water to remove salt and then light brush with rust powder and metallic details. They didn't go for as much as I wanted, only about 35/45$. Only one had a carriage, forgeworld was out of stock at the time.-
- Adeptus mechanicus
- Hydra
-
(and 5 more)
Tagged with:
-
From the album: Black Legion WIP
© Adam C Betts
-
- Black Legion
- Forgeworld
-
(and 2 more)
Tagged with:
-
From the album: Jolemai's Blood Angels
Dry fit of the Cerberus body. Look at the size of the flash!-
- Cerberus Heavy Tank Destrpyer
- Forgeworld
-
(and 1 more)
Tagged with:
-
From the album: Jolemai's Blood Angels
This is what it looks like in the box. Also, there are some BA iconography and a tank commander blister.-
- Cerberus Heavy Tank Destroyer
- Forgeworld
-
(and 1 more)
Tagged with:
-
From the album: The Seventh Legion
A Forgeworld Imperial Fists Contemptor with Plasma Cannon and Chainfist, with a kitbashed Delegatus to boot.-
- Imperial Fists
- Horus Heresy
-
(and 4 more)
Tagged with: